Newbie needs help, 9700np to Fire Gl

Discussion in 'RivaTuner Advanced Discussion forum' started by zixiazhang, Aug 9, 2004.

  1. zixiazhang

    zixiazhang Guest

    Hello:
    I just bought a second hand Powercolor 9700np when I installed the 4.7 drivers it said it was a 9700pro. I've managed to figure out how to overclock the graphics card I didnt need to use any patches. Ok I've never done overcloking before and I've never done a softmod and I've never done any patches, I know the basics of patching where you run a patch script file from C:\Program Files\RivaTuner\PatchScripts\ATI\SoftFireGL but I dont know which one to use 1021 or 1024++ or unified. Once I got the patch file open I dont know which file to patch because I've got multiple copies of ati2mtag.sys on my pc. Can some one please tell me what to do step by step? I've got xp pro sp1, another thing which firegl do I wanna force it to x1, x2....? oh and this is the graphics subsystem diagnostic report

    $ffffffffff ---------------------------------------------------
    $ffffffffff Northbridge information
    $ffffffffff ---------------------------------------------------
    $0400000000 Description : unknown
    $0400000001 Vendor ID : 1039 (SiS)
    $0400000002 Device ID : 0746
    $0400000003 AGP bus : revision 3.0
    $0400000004 AGP status : enabled
    $0400000005 AGP rate : 4x 8x supported, 8x selected
    $0400000006 AGP SBA : hardwired, enabled
    $0400000007 AGP FW : supported, enabled
    $ffffffffff ---------------------------------------------------
    $ffffffffff Display adapter information
    $ffffffffff ---------------------------------------------------
    $0000000000 Description : RADEON 9700 PRO
    $0000000001 Vendor ID : 1002 (ATI)
    $0000000002 Device ID : 4e44
    $0000000003 Location : bus 1, device 0, function 0
    $0000000004 Bus type : AGP revision 3.0
    $0000000005 AGP status : enabled
    $0000000006 AGP rate : 4x 8x supported, 8x selected
    $0000000007 AGP SBA : hardwired, enabled
    $0000000008 AGP FW : supported, enabled
    $0000000009 Base address 0 : c0000000 (memory range)
    $000000000a Base address 1 : 0000b800 (I/O range)
    $000000000b Base address 2 : cfef0000 (memory range)
    $000000000c Base address 3 : none
    $000000000d Base address 4 : none
    $000000000e Base address 5 : none
    $ffffffffff ---------------------------------------------------
    $ffffffffff ATI specific display adapter information
    $ffffffffff ---------------------------------------------------
    $0900000000 Graphics core : R300 (8x1)
    $0900000002 Memory bus : 256-bit
    $0900000001 Memory type : DDR SGRAM / SDRAM
    $0900000003 Memory amount : 128MB
    $0900000004 Core clock : 283.500MHz
    $0900000005 Memory clock : 270.000MHz (540.000MHz effective)
    $0900000006 Reference clock : 27.000MHz
    $ffffffffff ---------------------------------------------------
    $ffffffffff Memory timings
    $ffffffffff ---------------------------------------------------
    $0900000100 WR latency : 1.0
    $0900000101 CAS latency : 4
    $0900000102 CMD latency : 0.0
    $0900000103 STR latency : 1.5
    $0900000110 TRCDRD,RAS to CAS read : 7
    $0900000111 TRCDWR,RAS to CAS write : 2
    $0900000112 TRP ,Row precharge : 7
    $0900000113 TRAS ,Row active : 12
    $0900000114 TRRD ,Row active to row active command : 2
    $0900000115 TR2W ,Read to write turnaround : 3
    $0900000116 TWR ,Write recovery : 7
    $0900000117 TW2R ,Write to read turnaround : 3
    $0900000118 TW2R ,Write to read turnaround/same bnk : 7
    $0900000119 TR2R ,Read to read turnaround : 2


    Thanks for your help!
     
  2. Farner Brown

    Farner Brown Guest

Share This Page