OC system OCCT test failed @ 29mins error on core 0

Discussion in 'Die-hard Overclocking & Case Modifications' started by flash22, May 7, 2013.

  1. flash22

    flash22 Active Member

    Messages:
    72
    Likes Received:
    0
    GPU:
    Gigabyte GTX1070 G1 GMG
    hey guys,

    Trying to get my chip past 4ghz and tonight was the most successful so far and by far. Almost half an hour on full load @ 3.8ghz (34% OC).

    Current set up is:

    Vcore @ 1.38
    CPU Term. @ 1.38
    PPL @ 1.59
    REF @ .899
    MCH Core @ 1.4
    MCH Ref @ .874
    MCH Dram ref @ .850
    ICH I/O @ 1.570
    ICH Core @ 1.2
    Dram Volt @ 1.74 (stock is 1.5v for my ram)

    Temps are holding real steady at 72c full load. What would you say is causing the fail on core 0??

    Any help would be appreciated!
     
  2. Pill Monster

    Pill Monster Banned

    Messages:
    25,211
    Likes Received:
    9
    GPU:
    7950 Vapor-X 1100/1500
    Firstly why is your ram pushing 1.75v - are you trying to fry it? Reduce voltage back to stock settings.

    Raise CPU vcore I guess and keep testing. I'm not sure what temps a C2Q can handle but 72c might make it unstable....
     
    Last edited: May 7, 2013

Share This Page