ASROCK n68c-gsfx FX6300 overlock!

Discussion in 'Die-hard Overclocking & Case Modifications' started by RX480K, Feb 23, 2017.

  1. RX480K

    RX480K Guest

    Messages:
    1
    Likes Received:
    0
    GPU:
    RX480
    HELLO to everyone!it's pleasure to be here! :)
    i tried to overclock FX6300 from 3.5Ghz to 4.0-4.4,but everytime i try to run Prime95 to stress,everything froze or WIn10 "BSOD" and restart,i only play around with multiplier,on this PC i have asrock n68c-gsfx(i know it's not very good for OC) i wrote everything i found on OC Tweaker,i want to know what exactly turn on or off or disable!?i found on a form a guy who OC his CPU to stable 4.1,but the thread is too old and i don't received any answers,message,or mail,and i waited 20 days!:bang:

    overclock mode [auto]
    cpu frequency (mhz) [200]
    PICE frequency (mhz) [100]
    Boot failure guard [enabled]
    boot failure guard count [3]
    cpu/ldt spread spectrum [enabled]
    PCIE spread spectrum [enabled]
    sata spread spectrum [enabled]
    CPU active core control [all cores]
    AMD turbo core technology [auto]
    AMD C-state support [enabled]
    AMD APM [enabled]
    processor maximum frequency x31.5 6300mhz
    north bridge maximum frequency x31.0 6200mhz
    processor maximum voltage 1.5500 V
    Multiplier/voltage change [auto]
    HT bus speed [auto]
    HT bus width [auto]
    ----------------------------------------------
    memory configuration
    memory clock [auto]
    dram voltage [auto]
    ----------------------------------------------
    chipset settings
    chipset voltage [auto]
     
  2. lexer98

    lexer98 Guest

    Messages:
    660
    Likes Received:
    2
    GPU:
    GTX 1070 - WC
  3. Passus

    Passus Ancient Guru

    Messages:
    2,555
    Likes Received:
    1,029
    GPU:
    MSI 4070 Gaming X
    If those are the only settings in the OC window then stop and don't bother, the mobo is weak

    find a cheap amd970 based mobo or upgrade to a new build
     
  4. Knox

    Knox Ancient Guru

    Messages:
    1,573
    Likes Received:
    0
    GPU:
    Red Devil RX580 8GB
    A bit late to the show, but the VRMs on that board are weak. It was only ever meant to handle 95w cpu max. At that voltage and OC your closer to 150w. I agree with Passus, try to get a 900 series mobo. The old NVidia chipsets don't have all of the features to let AM3+ processors work at their best.
     

  5. Agonist

    Agonist Ancient Guru

    Messages:
    4,284
    Likes Received:
    1,312
    GPU:
    XFX 7900xtx Black
    I have to agree with everyone here.

    Have to get a cheap 9 series amd board.
    I paid $50 for my Gigabyte 970a and it runs a FX 8120 @ 4.6
     

Share This Page