I'm kinda confused after following clokevi's directions (found in this thread: http://forums.guru3d.com/showthread.php?s=&threadid=95150), I got everything just a TAD higher than what I had before, but interestingly, DRV and DX8 didn't increase much like most people have (in the 100s). GeForce 5900XT Dets 61.77 (3D Clocks @ 435/800) Run All Summary ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT 3dsmax-02 Weighted Geometric Mean = 11.33 ---------- SUM_RESULTS\DRV\SUMMARY.TXT drv-09 Weighted Geometric Mean = 48.58 ---------- SUM_RESULTS\DX\SUMMARY.TXT dx-08 Weighted Geometric Mean = 53.54 ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT light-06 Weighted Geometric Mean = 11.97 ---------- SUM_RESULTS\PROE\SUMMARY.TXT proe-02 Weighted Geometric Mean = 11.51 ---------- SUM_RESULTS\UGS\SUMMARY.TXT ugs-03 Weighted Geometric Mean = 7.478 Quadro3000 softmod with Dets 45.28 (435/800) Run All Summary ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT 3dsmax-02 Weighted Geometric Mean = 20.02 ---------- SUM_RESULTS\DRV\SUMMARY.TXT drv-09 Weighted Geometric Mean = 59.52 ---------- SUM_RESULTS\DX\SUMMARY.TXT dx-08 Weighted Geometric Mean = 58.80 ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT light-06 Weighted Geometric Mean = 24.59 ---------- SUM_RESULTS\PROE\SUMMARY.TXT proe-02 Weighted Geometric Mean = 22.55 ---------- SUM_RESULTS\UGS\SUMMARY.TXT ugs-03 Weighted Geometric Mean = 9.135 I also noticed that the nvidia tab in the advanced display section showed "Nvidia (Unknown)", but I had access to all the controls in the Quadro OGL CAD/CAM Profiles. And the tab doesn't display the blue Quadro name on it like what I had before with my Quadro2MXR or Quadro4 750XGL. Did it work? My scores with 3dsmax increased, I don't really care about the others as long as I don't have any problems with it. But I'm quite concerned about the DRV and DX8. What programs are these for?
1\ Set "PCI Device ID" to custem --->" 0338 (NVIDIA Quadro FX3000) " 2\ Set " Vertical Sync " to " Always off " test again .