 |
|
|
|
 |
 |
 |
 |
|
|||||||
 |
 |
 |
General Hardware Want to talk about anything Hardware related? This is the place, you can discuss it here.
|
|
 |
|
|
Thread Tools | Display Modes |
 |
Will Noctua NH-C12P SE14 Fit? - RaM Problems? |
 |
|
|
|
(#1)
|
|
Member Guru
Videocard: GTX680 DCII
Processor: 2500k
Mainboard: Z68P-DS3, DDR3 2133
Memory: 4x4GB G.Skill 1600 X
Soundcard:
PSU: Corsair CMPSU-700GEU GS70
|
Will Noctua NH-C12P SE14 Fit? - RaM Problems? -
07-21-2012, 17:45
| posts: 57
Hi,
(1st let me say that this site is totaly amazing! wish i knew about it before) - Specs: Core i5 2500K Gigabyte Z68P-DS3 4x4GB 1600 Ripjaws X - (All 4 slots are taken) ENGTX460 Sharkoon Rebel9 Aluminum ATX - (ATX Form Factor; 30.5cm x 21.5cm) - Now here are my thoughts: Iv got all 4 ram slots acupied _ - _ Would this be a problem? My mobo is stated as ATX _ ***BUT*** most ATX are Form Factor; 30.5cm x 24.5cm and main is Form Factor; 30.5cm x 21.5cm Its 3cm short _ - _ So is this going to be a problem? and the hight...? _ - _ Will i be able to close my case? Thank you |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#2)
|
|
Member Guru
Videocard: PowerColor AX7970 x2 6GB
Processor: AMD FX8350
Mainboard: GIGABYTE GA-990FXA-UD7 AM
Memory: CORSAIR DOMINATOR GT 32GB
Soundcard:
PSU: LEPA G Series 1600w
|
07-22-2012, 04:00
| posts: 46
It should fit. If your mobo is an ATX and the case is an ATX it should work. And yes it will close unless you have some kind of big tall heatsink and fan on the CPU like Guru3D uses in their testing.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
|
Ancient Guru
Videocard: 7950 Vapor-X 1150/1575
Processor: AMD FX-8320 @5.0
Mainboard: ASUS Sabertooth 990FX R2
Memory: 8GB Kingston HyperX 2400
Soundcard: Audigy 2 Platinum Ex 5.1
PSU: AcBel M8 750
|
07-22-2012, 05:43
| posts: 20,501 | Location: NZ
Quote:
http://www.noctua.at/main.php?show=p...5&lng=en&set=1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
|
Member Guru
Videocard: GTX680 DCII
Processor: 2500k
Mainboard: Z68P-DS3, DDR3 2133
Memory: 4x4GB G.Skill 1600 X
Soundcard:
PSU: Corsair CMPSU-700GEU GS70
|
07-22-2012, 06:45
| posts: 57
Quote:
WaW....Thank you very much! This Is The Best Comment I Got the past week! - (Best in terms of actual evidence)! - TX, Ur A Pro! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
|
Ancient Guru
Videocard: 7950 Vapor-X 1150/1575
Processor: AMD FX-8320 @5.0
Mainboard: ASUS Sabertooth 990FX R2
Memory: 8GB Kingston HyperX 2400
Soundcard: Audigy 2 Platinum Ex 5.1
PSU: AcBel M8 750
|
07-22-2012, 07:16
| posts: 20,501 | Location: NZ
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
Ancient Guru
Videocard: Asus 660Ti DirectCU II OC
Processor: i5-3570k
Mainboard: Asrock Z77 Pro4
Memory: 8gb G.Skill DDR3 1600
Soundcard: X-Fi XM
PSU: XFX Pro 750w
|
07-22-2012, 12:31
| posts: 4,978
Make sure you install the RAM first. The NH-C12P + Ripjaws can be a headache. That cooler might cover the first ram slot and you wont be able to install the ram with it on. Happened to me when I used that same cooler with Ripjaws on a Gigabyte P67 board I put together for a friend.
|
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Powered by vBulletin®
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2012, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.