5700Ultra to Quadro 1100 sucess.I think. - Page 2

klipi · 06-13-2004, 23:54 | posts: 39

Im using 53.03.
53.30 probably also works.....
AlecRyben is right!

06-16-2004, 13:36 | posts: n/a

So is it possible to run forceware on anything except a *real* quadro?

**think i can confirm -** 06-21-2004, 21:58 | posts: n/a

i was unable to change bios as i bridged resistor (some month ago as i thought i failed to hardmod) and now i retried with nvstrap (rivatuner) on 53.03 driver and voila no more crashdowns on opengl programs.... Have no testsoftware so i can´t verify speedimprovements but at least overlay is working so i have what i was looking for

klipi · 06-30-2004, 22:16 | posts: 39

I installed riva tuner 15 and forceware 61.71

Hardmoded 5700Ultra + ForceWareAntiprotector+NvstrapAntiprotection

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 15.53

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 87.56

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 82.81

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 18.25

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 26.40

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 38.93

-------------------------------------------------------------------

When I use SoftimageXSI preset in OGL Nvidia driver settings UGS-03 goes down to 18.00.........I realize that when
Maximize Texture Memory is enabled UGS-03 is sloooooooow!

Posted results are done with 3dsmax quadro preset.

cyclic · 07-16-2004, 13:42 | posts: 3

Yes,
her my result :

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 31.93

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 164.2

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 165.5

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 38.25

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 48.40

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 49.25

08-03-2004, 21:28 | posts: n/a

my results with 61.77 viewperf 7.1.1

unpatched and hardmod (GeforceFX)
Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 10.23

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 29.03

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 34.93

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 11.13

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 10.68

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 13.29

patched and hardmod (QuadroFX1100)

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 17.78

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 56.86

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 59.88

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 22.75

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 27.30

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 29.28

how comes your results vary that much, you overclocked also?

Mchart · 08-07-2004, 06:36 | posts: 435 | Location: Gurnee, IL

I have a 5700ultra.. What is the point of doing this? Just so you can be able to use apps that require graphics cards like that, or does it also improve your FPS in games?

08-08-2004, 02:27 | posts: n/a

modding to Quadro will reduce your gaming performance. So i guess u will not benefit from it....

atomman · 08-14-2004, 21:20 | posts: 48

which cards have been reported to be successfull? Do all of them work?

which would be the best choice:

Soltek SL-5700-QD
Asus V9570
Gainward Goldensample FX/Utra 5700

cheers,

08-28-2004, 17:59 | posts: n/a

I have been reviewing this forum and had a simple question: so does the hard mod actually change a Geforce FX card to a Quadro? I mean, in addition to the NVStrap, drivers, etc does the card work exactly like a Quadro in, say, 3DMax?

AlecRyben · 08-28-2004, 19:19 | posts: 7,781 | Location: Utopia Planitia, Mars

If the clocks for GPU/MEM are the same as in a comparable Quadro model, the card should work identically when hardmoded. The only thing missing will be the shutter glasses connector and the framelock/genlock connectors of the Quadro FX 3000G.

08-28-2004, 19:37 | posts: n/a

Thanks AlecRyben! BTW, does this hard mod work only for 5700Ultras? What would a standard 5700 mod into? (Not an LE/SE type model) Does anyone know of a thread/website noting what Geforce cards get modded to when hard modded to Quadros? (i.e. 5200FX-->FX500, 5700Ultra-->1100FX)

AlecRyben · *Last edited by AlecRyben; 08-29-2004 at 11:39.*

GeForce4 Ti 4600/4800 300 / 650 <- Quadro4 900/980
GeForce4 Ti 4400/4800 SE 275 / 550 <- Quadro4 700/750
GeForce4 Ti 4200/4200-8X 250 / 500
GeForce3 Ti500 240 / 500
GeForce3 200 / 460 <- Quadro DCC
GeForce3 Ti200 175 / 400
GeForce2 MX/MX400 (175|200) / 183 <- Quadro2 MXR

GeForce FX 5950 NV38 (475/950) <- NV38GL

GeForce FX 5900 NV35 400/800 (450/850)
<- NV35GL Quadro FX 3000 (450/850) Quadro FX 700 (275/550)

GeForce FX 5700 NV36 425/500 (475/900)
<- NV36GL Quadro FX 1100 (425/650)

GeForce FX 5800 NV30 400/800 (500/1000)
<- NV30GL Quadro FX 1000/2000 (300/600)/(400/800)

GeForce FX 5600 NV31
<- NV31GL

GeForce FX 5200 NV34
<- NV34GL Quadro FX 500

Quadro FX 700 AGP ----------> Quadro FX 1300 PCI-E?
GeForce 6800 GT PCI-E ------> Quadro FX 3400 PCI-E
GeForce 6800 Ultra ---------> Quadro FX 4000 AGP
GeForce 6800 Ultra PCI-E ---> Quadro FX 4400 PCI-E

diDuke · **hardmodded FX1100 + 56.90 Forceware -** 09-12-2004, 02:36 | posts: 13

>I hard-moded my FX5700 non-ultra (Prolink) by replacing the resistors.

>then flashed BIOS with 034E device ID

>installed NVSTRAP driver

>downloaded 65.90 Forceware (it's for Quadro 4000 only)
from www.nvidia.com. It's in the Quadro section

>added two lines in *.inf file for 034E detection
it's something like this :
NV36.034E.1 bla bla bla... FX1100

>installed driver 65.90 (the advanced OpenGL features
are missing from the control panel

>patched c:\windows\system32\drivers\nv4mini.sys
with NVStrapAnitiprotection, ForceWareAntiprotection
scripts. Now the professional features are open in
control panel (overlays, unified depth/back buffer etc...)

>the results at ugs03 (Specview7.1.1) are around 25
(overclocked at 485 with AMD2600+/nForce2)
they are much better than anything I tried with
5x.xx or 4x.xx drivers. Maya is working great (smooth
viewport, better hardware buffer). nVidia driver for
3d Studio 6 installed without no professional card
errors and is working without any crashes

>the OpenGl driver version is now 1.5.2 (verified from
Rivatuner snapshot feature). And something unexpected
...Doom3 runs smoother than ever before (ultra quality
@ 800x600)

>a big THANK YOU goes to Unwinder for his research and
development of Rivatuner.

AlecRyben · *Last edited by AlecRyben; 09-12-2004 at 05:04.*

Cool! That means the new Rivatuner supports NVStrap + NVstrap antiprotection patch on 65.90 drivers.
That's really good news for all Geforce 1,2,3 softmodders and all GeForce FX card owners with hardmoded GPU resistors...

zakk5 · 09-13-2004, 17:32 | posts: 15

@ diDuke:

hi!!

could you please tell me how to modify the 65.90 driver (inf) to recognize my FX 5800 @ quadro fx 2000?!

´cause theres no need to use SQ4-patchscript for the fx5800 i´d like to check if the 65.90 driver might work.
i´ve already patched the driver with RT 15.1 NVStrap Antiprotection but it only displays Quadro fx 4000 ... not fx 2000

Thanx!!!

Zakk5

diDuke · 10-08-2004, 19:56 | posts: 13

U need to add two lines in the *.inf file. U have to use the proper DEV_IDs for your card in the new lines. Look at my original post.

zakk5 · 10-10-2004, 00:32 | posts: 15

hi diDuke

thank you for your reply, but could you please tell me any further details?
it might be very helpful to me if you could copy/ paste the modded part of your modified inf.

thanks a lot

zakk5!

10-10-2004, 16:23 | posts: n/a

Hi, U r sooooooooooooooo fantasy!!!
can U tell me the detail of ur moding?
Which driver U use?
the proccess is?!
Thx U very much!
My mail box is chichihmao@hotmail.com
Hope to hear from u soon!

Quote:

Originally posted by cyclic
Yes,
her my result :

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 31.93

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 164.2

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 165.5

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 38.25

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 48.40

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 49.25