Nvidia GeForce 331.40 Beta - Download & Discussion

Thank for telling that, so it can be only happen with x32?[/QUOTE]


Maybe? I'm going to switch from Firefox to PaleMoon on my Windows 7 32bit rig, and see if I can duplicate the same effect. PaleMoon is a strip down version of Firefox, if it works on my 32bit machine then it could be a problem with Firefox. I'll let PaleMoon idol for a while then start using it, that seems to be the time when Firefox crashes (taking the whole computer down with it) after a long idol time and sudden usage.

 

Win7 64. Sli flickers in bf4 beta and low gpu use 50-75%.
I7 3820 4400mhz HT on. 8GB memory 2133mhz, 2xgtx780 reference

 

bios, enable the CSM and allow the gpu to use the legacy rom.

What is this for and should we do this Always ? ore only with this driver ?

 

Use this Nvidia reg hack. https://forums.geforce.com/default/...n3-support-on-x79-platform-updated-6-19-2012/ Right click and run as administrator. This should enable PCI-E 3 on your set up.

 

guys sorry about my ranting..

turned out to be a problem with my bios.

was testing an older bios when I starting having the problems with bf4

went back to newer bios and problem went away...

 

Driver working fine for me, no issues. Although no improvement in frame rates for the built in benchmarks within the following games: Metro Last Light, Tomb Raider, Bioshock Infinite, Batman Arkham City, F1 2012, Hitman Absolution. Frame rates exactly the same as the last whql driver.

 

Ill try asking again, what does this mean:
"Attention SLI User! TDR in SLI mode with UEFI enabled (UEFI Windows installation) upon reboot/driver install (will be fixed in next beta release. Disable UEFI as temporary workaround!)"

 

CPU overclocks seem to be causing many issues too....

FYI you might not be as stable as you think.

 

ok, will wait for the news.

It's means that, if you having a BIOS with UEFI enabled, and you install windows which support UEFI on it, you has the chance to see TDR(timeout detection and recovery) happen on the driver after you install this driver and reboot.

If this happen, just going to BIOS and disable UEFI.

 

Finally a response, thank you so much

My motherboard actually has some Win8 functions in UEFI but I tried enabling them when I bought the board and couldn't even boot to Windows so I shut them off. Guess I'm safe now then

 

Thanks you for this. Though GPU-Z reports that my bus interface is still PCI-E 2.0 x16 after running the .exe as admin and rebooting.

Shouldn't it work for my rig aswell?

 

"PUP.Optional.Installrex" reports Malwarebytes for GPU-Z.rar.exe

uke2:

Edit: http://www.techpowerup.com/forums/showthread.php?t=185299 gets it done

Thanks, all the same.

 

Check the file VirusTotal

 

If Windows 64 was installed in UEFI-mode, turning UEFI off most probably will cause boot failure.

 

Yes it should work with your rig. Did you enable PCI-E Gen 3 in your bios? You can go here http://rog.asus.com/forum/forumdisplay.php?116-Older-Maximus-Series-Motherboards Tons of info you may find interesting. Take your time and read as much as you can..Good luck!!

 

Since 320.x version i have freezes Firefox related, and now if i upgrade to the newest beta for Bf4 keeps crashing like 320 did...

WTF are NVIDIA doing? Im not going to change my browser ill stick with 314

 

I have the same problem, NV surround, GTX680 SLI. I work with 314.22 driver and there is no problem but BF4 works bad. :bang: What last kind of driver you are using for NV surround ? thx

 

Yup, because the ways to boot has been changed too.
Anyways, I think this bug only happen for PCI-E 3.0+UEFI?

 

Like the build in AA, disable it and use post processing, FXAA gave me much better results, especially while using 3DVision, SweetFx should be able to give the same result.
Also, try to avoid Ambient Occlusion , it's a killer feature, it can even hammer a Titan down in fps.

I don't have the game installed atm. so can't give you anything but an old config I had posted, I used that with ATI 5870 which was worse then a single GTX260 for RIFT

Code:

[Video]
AmbientOcclusion = False
AnisotropicFiltering = 16
AntialiasMode = 0
AO = False
AutoAdjustSettings = False
DetailObjectsEnabled = True
DirectionalShadowsEnabled = False
EdgeAntialiasEnabled = False
FullscreenFXEnabled = True
Gamma = 0.946000
GroundClutterDensity = 2
GroundClutterRadius = 128
LegacyRenderer = False
LightingComplexity = 0.300000
MaxLOD = 3
MaxShaderLOD = 10
MinMaxFilter = 3
MinShaderLOD = 10
MipFilter = 1
MultipassTerrainEnabled = True
ObjectDetail = 64
ObjectDrawDistance = 128
OverrideGamma = True
ProjectedTexturesEnabled = True
QualityPreset = 5
ResolutionX = 1920
ResolutionY = 1080
settingsInitialized = True
ShadowMapResolution = 1
ShadowMode = 0
TerrainDetail = 6
TerrainDrawDistance = 4
TextureQuality = 3
VfxCullDistance = 128
VFXLimit = 128
VSyncEnabled = False
WindowMode = 1
 
[Window]
Maximized = False

Those can be pushed higher with all the newer cards.
There was something at the lower bracket left of AA that should be off for Nvidia cards.

 

Arma 3 doesn't run like **** because NVIDIA needs to optimize drivers Arma 3 runs like **** because it's coded like **** and still using a 10 year old engine and the engine is unable to properly use the power of todays CPUs properly which is why you see it only using like 25 percent cpu usage on my 3770k. Game is massively CPU bottle necked which is the reason your FPS is ****.