Mass Effect 3 - NZXT Switch 810 Build Log

[MybadOmen]

UPDATE !


Founder of NZXT Johnny hou takes notice of my work on the "Mass Effect 3 - NZXT Switch 810 build" !



This is a Great Honor to me because i love the NZXT Company ,Their Customer Service, Products just everything about them is great and lets not forget how big they contribute to the community all the time. I have met and worked with many NZXT employees (Phone and email) But never imagined that the actual Founder of the company would take notice of me seeing he must be extremely busy.


Not sure what else to say . Just every day things just seem to blow my mind when it comes to my Modding. Lol usually when i think im not doing good and feeling down about it.

Here is the Link to see what the Founder wrote as it wasn't all about just me it was to all the Modders :

http://nzxtcorp.wordpress.com/2012/0...l-the-modders/

Take care guys and once again thanks so much for all the support you have given through all my builds.

Also stay Tuned for more on the Mass Effect Build.

Your friend and fellow Modder ,

MybadOmen

[kanana]

nice job!!very clean...

[JeyNyce]

The mod has been posted on maximum PC site:
http://www.maximumpc.com/article/new...galactic_socks

Congrats man, you deserve it!!

[MybadOmen]

Update !

I have a new Update for you guys and this is a BIG one! "Mass Effect 3 -NZXT Switch 810 Mod" is now Alive !!!!


Also for those of you the haven't seen it ,Not only did Venom make Maximum PC Magazine but now Mass Effect 3 build has also. (Really wish they had these Photo's below though)





Here is a link to the Maximum PC Magazine Article: http://www.maximumpc.com/article/new...galactic_socks

This Update i would like to thank EKWB, Mayhem's and Primochill since they are the ones that made this Update Possible.


First off i mixed Mayhem's Pastel Ice White concentrate with roughly 2 quarts of PrimoChill Base/Deionized Water

Next i mixed 1 Bottle of Concentrated Mayhem's light Red Pastel to another 2 quarts of PrimoChill Base/Deionized Water
and then added 2 bottles of Mayhem's Red Dye to get the red i needed 20ML (Not all was used in build)




And finally the shots of Her Running in all her Glory ! (Build is not complete . Just some cosmetic stuff to do and she is all done)




















Really hope you guys Like it so far, And again still More to come so Keep Watching !

MybadOmen

[MybadOmen]

Update!

Huge thanks to Razer and there Generosity donating some Razer Mass Effect Gear to the build:




Here is what they Donated to the Build as they seen the build and thought it would be a great match. I totally agree! :

Razer Black Widow Ultimate Keyboard "Mass Effect 3 Edition"

The Normandy SR2 is Commander Shepard’s starship and a quick maneuvering vehicle great for traversing the galaxy, getting the team extracted from hot zones, and dropping behind enemy lines. Just like the Normandy, the Razer BlackWidow Ultimate Mass Effect 3 Edition gaming keyboard is a state-of-the-art weapon with full-fledged heavy-duty mechanical key infrastructure. When it delivers crisp, tactile feedback and faster keystroke actuation, this revolutionary, fully backlit gaming keyboard accomplishes your mission with razor-sharp efficiency.




Razer Imperator Mouse "Mass Effect 3 Edition"

The war for Earth has begun, and only Commander Shepard stands between the Reapers and Earth’s total annihilation in Mass Effect 3. Use the Razer Imperator Mass Effect 3 Edition gaming mouse to give yourself the better edge and dispatch your ruthless enemies before they render all life extinct. The Razer Imperator ME3 Edition has been exclusively emblazoned with the iconic N7 logo, bestowed only upon the highest-ranking soldiers of the Systems Alliance military, displayed on Shepard’s Armor, and now in your capable hand.




Razer Vespula Mouse Pad "Mass Effect 3 Edition"

In Mass Effect 3, Commander Shepard and his team will face their greatest challenge yet - the Reapers. The Razer Vespula dual-sided gaming mouse mat is the perfect way to ensure that you’re prepared for each battle. Get neck-breaking acceleration under your mouse with the SPEED side to hit the enemies before they can react, or deliver precise headshots with the measured movement of the CONTROL side. Exclusively designed in pitch-black finish with the iconic N7 logo and stripes displayed on Shepard’s Armor, the Razer Vespula Mass Effect 3 Edition readies both you and your mouse for the war to take Earth back.




For more info on Razer's Great Products check out these Links:

www.razerzone.com
www.razerzone.com/me3
www.facebook.com/razer


Take Care Guys and just working on the window and Decals for the build and you will see them as soon as they are done!

MybadOmen

[MybadOmen]

UPDATE!


Still More to come on this build Guys. Just waiting on a few things and been hard at work designing them. I should have the rest of the stuff soon and hopefully it will really make the build Pop! If not back to the drawing board.


Also would like to Thank the Sponsors that helped make this build possible with this Photo that "gr3nd3l" Put together for me.




Also Special Thanks to "Kaged" for helping me once again with the Decals for this build and working with me to get them just right.


And of course Thank You to all the People that follow my builds and my work and that support me through the builds.Good and the Bad.


MybadOmen

[MybadOmen]

UPDATE!

Just a small update is all but the build and Theme is coming together now. Also the back door makes sure there is no confusion on what company makes the case.


I also like to thank my buddy Kaged that helped me with making the masking for Venom and also help design and make the ME3 Decals also. He is also teaching me to use my own Plotter so i can some day do it myself


Ok Me and Kaged have been talking for a while again deciding on idea's for the Vinyl decals again but this time for the outside of the case. There were many Decals made but at the end i am not sure which will be used and which wont. but so far some are on for sure.


Ok so today i 3M Wrapped the back door of the case which was a pain by myself but i got it done. Also i added Decals to the front and the back panel. I am very aware there is a space above my Antec Veris (Still working on that)


Ok i will shut up and show the Photos because that's what you all really want to see

















Well that's it for now. Hoping to have the build completed by Monday just waiting on the window is all and a couple small fixes.

Keep watching its not over yet ! Plus there will soon be a Nice Photo shoot done by my Aunt for me (Photographer)

MybadOmen

[FULMTL]

A good location for pics would be to bring it to a club, put it on the dance floor, and have people dance around it.

[MybadOmen]

Lol.

Just wanted to pop in and Post hi. Another delay as usual but maybe i will get lucky and get the parts a day or 2 late Only , The bad part is a took the whole weekend off to complete this build.

Back soon with good news hopefully but while waiting you should really check out the whole log. I know its huge but there was allot of work. Looking at the case you would never tell the fabrication that was done .

Take Care

MybadOmen

[MybadOmen]

No idea How they did it but they shipped my Parts to finish the Mass Effect 3 Switch 810 Mod yesterday from New Mexico and i had them first thing this morning in Massachusetts.

That means everything is back on track and i should be posting updates all weekend and finishing this build and finally labeling it complete.

Then the Photo shoot will be done but not sure that will be done by Monday as the film being used is 35mm.

Back soon with Updates and Photos. (Also Raining )

MybadOmen

[MybadOmen]

UPDATE !

''Warning these photo's are just crappy ones from my iPhone good shots will be taken later and posted''.

First off really want to thank my Sponsor/Friend at Primochill for doing the etching for me.Highly appreciated Mate.

Well finally the update that puts everything together. I designed a window that i wanted etched and spaced everything so it wouldn't ruin the view of important stuff inside like my EK Parts ,Plextor SSD's etc.
Anyway my great Sponsor Primochill got me this window overnight so i could complete the Build by Monday and as you can see he never fails me. Thank you Primochill for the great job.


Anyway its not totally complete a few small things to do plus a Photo shoot with the matching Keyboard,Mouse etc from Razer.

Here was the Black NZXT Switch 810 i received:



and here it is now:

Here is the Mass Effect 3 -NZXT Switch 810 Mod

The package that i thought would be very late actually came right away!



And the Window all cut to size i requested and etching exactly where i wanted it.



















Best i can do for now till the Photo shoot but believe me . It looks a Million times better then the Photos:


And this ones for you NZXT for giving me this project in the first place and being more then just a sponsor to me.






Thank all you guys so much for supporting me and being my friend through this build and the past builds.

There should be 2 more Posts before Completion and then the Grand Finally the Photo shoot finally done right. Any Updates after that will just be any achievements that the Build happens to get . If any I imagine thats up to my followers to Vote for me.

Take Care and sorry no better Photo's yet. But really hoping you guys like what i did with the window.

MybadOmen

[MybadOmen]

Update ! (Sorta)


Hiya Guys i got a chance to get everything outside today and actually use the PC for a while today. I decided to set everything up and get some better Photos (From an iPhone).

So i wont say much here i will just post a ton of Photos .

Enjoy and hope you like it !

[MybadOmen]

continued from last post:


























Still will be Better Photo's to come but this build is Officially complete although you may see me do some small stuff here and there to it.

Thank you to all my Great Sponsors that have all been a pleasure to work with.

Thank you to all the people who Followed all my threads including this one.

Thank you to the new people that just noticed my work and took the time to look over the work logs.


Please don't forget a have a new Build log opening soon and that will be a Dimastech easy/hard 2.5 Bench Mod (Dont Miss it)


Your Friend,

MybadOmen

[MybadOmen]

One More to Add in honor of NZXT :

[signex]

That looks sick!

[MybadOmen]

Thank You Razer


I know the build is complete but i wanted to add this quick thank you to Razer for their donation of the Mouse Keyboard and Mouse pad that has its own update in the index that gives more information about the Products. This update is just to show off how nice it looks with the Mass Effect 3 NZXT Switch 810 Mod. I also used the mouse and keyboard for many hours now and it is smooth as glass and the keyboard ,OMG talk about nice.

For more information on Razer's Amazing Products see links below. I can proudly and honestly give you my word they are high quality incredible products. Mass Effect ones being the best of course . Lol honestly even if your not a Mass Effect 3 Lover the only thing it has is N7 and Carbon Fiber so even non ME3 lovers will like them.

www.razerzone.com

www.razerzone.com/me3

www.facebook.com/razer


Anyway Thank You Again Razer and hope you enjoy the build and this little update:




Razer Black Widow Ultimate Keyboard "Mass Effect 3 Edition"




Razer Imperator Mouse & Razer Vespula Mouse Pad "Mass Effect 3 Edition"




Take Care guys and again i hope you all love the build it was ALLOT of work and i would say it was a success.


MybadOmen

[Area 51]

Unreal build, I must say that took great vision to see that before completion, looks amazing great job.

[dizzie]

Gotta love Mass Effect (all 3) !
Well I do, not sure i'll stop playing

[must_kill_ati]

The paintjob on the case rules. Every time I see it, I feel the need to go drive my baby.

[MybadOmen]

Originally Posted by must_kill_ati

The paintjob on the case rules. Every time I see it, I feel the need to go drive my baby.

Lol wanna Trade !


Also Thank you all for choosing my Mass Effect 3 - NZXT Switch 810 as Rig of the Month!

I am completely honored by it.

MybadOmen

[PerfectLifeform]

incredible job by all the sponsors and of course bad omen.. incredible skills...

[MybadOmen]

Originally Posted by PerfectLifeform

incredible job by all the sponsors and of course bad omen.. incredible skills...

Thank you Sir for the Kind Words. And nice to see someone thanking the sponsors also as they deserve it as well or the build wouldn't exist.


MybadOmen

[MybadOmen]

Thanks for the Rig of the Month Win guys . Lost for words ! Also here are some more Photos. Hope you enjoy them:

Some More Cool Photos id like to share,














Take care and sorry if you seen some of them.

MybadOmen

[Area 51]

This thing rocks

[MybadOmen]

Originally Posted by Area 51

This thing rocks

Lol thank you i worked very hard on it. Glad you like it.

MybadOmen