MSI Afterburner 2.2.1 (2012-05-14)

msi-afterburner · **MSI Afterburner 2.2.1 (2012-05-14) -** 05-14-2012, 11:41 | posts: 402

Hi guys, the Afterburner 2.2.1 official version and Kombustor 2.3.0 are ready for you to download. this version supports the control of South Island and Kepler card, if you get the card, you may try to play it.

Changes list includes:

• Added reference design AMD RADEON 7850 series graphics cards support
• Added NVIDIA GeForce GTX 690 series graphic cards support
• Added big editions of default and legacy skins
• Updated localizations

Download link:
http://downloads.guru3d.com/Afterbur...load-2562.html

IMaysky · 05-14-2012, 13:37 | posts: 40

Quote:

Originally Posted by msi-afterburner

• Added big editions of default and legacy skins

Thank you very much!

BenchAndGames · 05-14-2012, 13:55 | posts: 151 | Location: Madrid

Quote:

Originally Posted by msi-afterburner

• Added big editions of default and legacy skins

Is what I needed, it hurts my eyes, from staring at the small letters and numbers.
Thank You !!!

KOBE23 · 05-14-2012, 15:38 | posts: 3 | Location: Earth

Thank you soo much

erm · *Last edited by erm; 05-14-2012 at 18:18.*

Thanks Unwinder !

lovely fonts of big skins

Mott · *Last edited by Mott; 05-14-2012 at 19:05.*

Thanks!

elbubi · 05-14-2012, 19:25 | posts: 92 | Location: Rosario, Argentina

Thanks as always Unwinder!!!

kpo6969 · 05-14-2012, 19:31 | posts: 564 | Location: Pennsylvania

Thank you.

k3vst3r · 05-14-2012, 19:35 | posts: 2,403 | Location: Manchester UK

cheers

Conrad.TDI · 05-15-2012, 06:44 | posts: 23

Thank you Unwinder for the new version!

AMD@OPA · 05-15-2012, 08:52 | posts: 14 | Location: Germany

Thanks!

Gizmo1981 · 05-17-2012, 17:21 | posts: 22

Thanks OP.

Also, Could anyone tell me how to record Bad Company 2 multiplayer with MSI AB?

I've been trying all sorts of settings and nothing works, I can't see the FPS counter in the corner of my screen in BC2 but I can in others.

kcuestag · 05-18-2012, 20:05 | posts: 539 | Location: Spain

I haven't updated this in a while, using 2.2.0 right now.

Should I install these on top or uninstall 2.2.0 first?

ZebMacahan · 05-21-2012, 19:55 | posts: 183 | Location: Norway

Just got my GTX 690. Whats up with the voltage and shader clock being blank? Also, the core clock and memory clock says +0?

Using MSI afterburner ver 2.2.1.

anDrasch · 05-21-2012, 20:13 | posts: 53 | Location: Germany, Berlin

do you use an older skin?
legacy or standart skin?
with kepler is a different way to clock called dynamic overclocking
you have to go with such things like offset and power limit
Godspeed!

ZebMacahan · 05-21-2012, 20:15 | posts: 183 | Location: Norway

Quote:

Originally Posted by anDrasch

do you use an older skin?
legacy or standart skin?
with kepler is a different way to clock called dynamic overclocking
you have to go with such things like offset and power limit
Godspeed!

I use legacy skin. But I find this strange. Anyone care to enlighten me on this subject?

anDrasch · *Last edited by anDrasch; 05-21-2012 at 20:33.*

you should use the default skin for this card

Quote:

Anyone care to enlighten me on this subject?

read here-> Precision FAQ

Quote:

Q. What is Power Target and how does it affect my card?
A. Power Target is a power limiter. Increasing the Power Target will increase the available power to your graphics card, allowing for higher overclocks, or higher boost clocks. NOTE: Increasing this value may increase your GPU temperature. This feature is only available on 600 series graphics cards.
Q. What is a Clock Offset?
A. Clock offsets are the new way to overclock for 600 series graphics cards. You overclock by setting an offset value, this value is + or – every prequalified clockspeed. EG: If your boost clock is 1058MHz, setting a +100MHz offset will make your boost clock 1158MHz. Note: This setting only applies to 600 series graphics cards.

ZebMacahan · 05-21-2012, 20:36 | posts: 183 | Location: Norway

Thanks, understand more now:-). But why is the core clock and memory clock at +0?