NVIDIA Inspector - Release 1.95

[The Sleeper]

Originally Posted by MfA

just add it to target line it'll work..

D:\nvidiaInspector\nvidiaInspector.exe -restartDisplayDriver

Ok :0)

So everytime you exit a game it resets the display driver right ?

[IKnowJack]

Originally Posted by The Sleeper

Ok :0)

So everytime you exit a game it resets the display driver right ?

no...basically you make a new shortcut to inspector, add -restartDisplayDriver to the end of target.. then when you want to reset, just double click the icon and wait while it resets..done.. bingo.. fixed!

not really sure if this is related...but i noticed today that my clocks are still down at 51mhz AFTER a resume from sleep! first time ever...i have a hunch that this new option in inspector fixed the problem!

[The Sleeper]

Originally Posted by IKnowJack

no...basically you make a new shortcut to inspector, add -restartDisplayDriver to the end of target.. then when you want to reset, just double click the icon and wait while it resets..done.. bingo.. fixed!

not really sure if this is related...but i noticed today that my clocks are still down at 51mhz AFTER a resume from sleep! first time ever...i have a hunch that this new option in inspector fixed the problem!

Cool ... :0)

I will try this tonight

Thanks !

[-Tj-]

New version 1.9.6.6

- clock domains reworked, fixed some 304.xx issues on kepler
- switched shader to gpu clock for monitoring default selection
- updated some setting constants for 302.xx drivers

[Zurvan]

Hey guys.
First of all sorry if this question has already been answered but I just don't find a straight answer. I've been searching for days but I just can't figure out how to limit FPS on Skyrim using Inspector. I have the .exe file and the xlm file in the same folder, in the profile section I have typed skyrim and changed a couple of stuff but non of them seem to apply when I press apply. I ask this because I had (micro) stuttering problems with Skyrim and my gamepad gets a lot of input lag when Vsync is on in the game itself. I have turned it off in Skyrim.ini and now the input lag is gone but I do get screen tearing (not that bad but still). I have also disabled AF and AA through Skyrim options because even on 2 it slows my laptop down like crazy.

I've heard that you better apply AF and AA through inspector (with AA-setting 4x multisampling and AF setting to 4x (for AF do I have to turn AF mode to application controlled?)

The damn FPS limiter is the problem really, it just won't work. After I apply the changes I minimize Inspector and let it run. I'm I missing something here or does Inspector not match my graphic cards? (301.42)

One thing when I use msi after burner, the FPS get locked though and I'm able to lock FPS and combine it with Vsync off. Can someone please help out? Thanks

[GabeA]

It doesn't matter where the game executable is, or where Inspector is. Inspector hooks into the same profile list NVIDIA Control Panel uses. The driver doesn't know what to do with a profile name like "Skyrim" or "TESV" -- it only recognizes the game executable (anywhere on your computer) linked to a profile named "Elder Scrolls V: Skyrim".

If you can't find Skyrim listed in Inspector/CP's profile list under that name, you'll have to browse to the executable (TESV.exe) in CP and add it to the profile list. Once "Elder Scrolls V: Skyrim" is is in the list, scroll down to framerate limiter and set it to 58 (or whatever you want). Works fine for me.

[WhiteLightning]

have you tried setting the limiter on in the global profile to see if it works ?

[Zurvan]

thank you guys but the suggested stuff didn't work. What did work though was completely uninstalling Nvidia drivers (and removing EVERYTHING in Safe Mode with Driver Sweeper), re install with advanced (optional) and uncheck unnecessary stuff like 3D Vision, PhysX, HD audio (I didn't use them anyway) and now Nvidia Inspector can access the Nvidia data without a problem

[HASHMAX]

Hi Orbmu

fix please detection PCI-E PLX mode, for videocard devices

example: in first pci-e slot is Videocapture device or soundcard then second pci-e slot can enable PLX x16 mode pci-e


x16 mode but your inspector detect x8 mode... but my videocard working with PLX mode

example with motherboard ASUS MAXIMUS V EXTREME

if videocard in first pci-e slot then other slots cant working with another device

[Orbmu2k]

Update 1.9.7.0 BETA (full TITAN support)

Originally Posted by Changelog

- added support for overvoltage (GK110)
- added support for temperature target (GK110)
- enabled and improved estimated max boost for GK110
- added CLI parameter "-setIlumination" for logo brightness control (GTX 690, TITAN; SLIBRIDGE)
- added CLI parameters for overvoltage and temperature target
- improved high dpi layout for driver settings

Originally Posted by HASHMAX

Hi Orbmu
fix please detection PCI-E PLX mode, for videocard devices

this is nvidia driver detection, so nvidia has to fix this

[knuckles84]

Thank :-)

I have just a little Problem, everytime I open you Application, the OC Menu ist open, but marked as Close....

The second think, can you just Explain what the CLI parameter "-setIlumination" is?

[Orbmu2k]

Originally Posted by knuckles84

I have just a little Problem, everytime I open you Application, the OC Menu ist open, but marked as Close....

damn, missed to revert this before deploy

Originally Posted by knuckles84

The second think, can you just Explain what the CLI parameter "-setIlumination" is?

as told in changelog, you can set the LED brightness level of cards which have such a ilumination logo (GTX690 and TITAN so far)

[knuckles84]

Originally Posted by Orbmu2k

damn, missed to revert this before deploy

A little Bugfix Release ?

[cowie]

Thanks for the update.

[dsbig]

Originally Posted by knuckles84

Thank :-)

I have just a little Problem, everytime I open you Application, the OC Menu ist open, but marked as Close....

The second think, can you just Explain what the CLI parameter "-setIlumination" is?

I have the same problem with the oc menu is stuck open

[Darren Hodgson]

Same issue with OC menu open here too, something I've never use as I favour Afterburner for overclocking.

[DooGie]

Originally Posted by Darren Hodgson

Same issue with OC menu open here too, something I've never use as I favour Afterburner for overclocking.

Same here Darren, I would have thought that Orbmu2k would have released a fixed version almost immediately.

[Orbmu2k]

Its nothing critical, fix will be included in next release.

[DooGie]

Originally Posted by Orbmu2k

Its nothing critical, fix will be included in next release.

Yeah I realise that Orbmu2k but it is an annoyance.

[xankazo]

I am also waiting for the overclock menu menu fix. It may not be critical, but it sure is annoying.

[Orbmu2k]

whats the point thats so annoying, if you use inspector for OC its fine you safe one click, if you use it for game profiles just start directly into that using the create shortcut feature in the toolbar or adding "-showSettingsOnly -requestElevation" to the shortcut manually

[Klementh]

Originally Posted by Orbmu2k

if you use it for game profiles just start directly into that using the create shortcut feature in the toolbar or adding "-showSettingsOnly -requestElevation" to the shortcut manually

Thanks, you just saved me a lot of time. Also, the program seems to work properly without "-requestElevation". Is it needed for only certain settings?

[Iruwen]

Those marked with a small shield, noticeably the compatibility bits section.

[Klementh]

Oh I see, those settings don't appear at all without admin rights.
Thank you Iruwen.

[TK421]

Someone on the Nexus boards was trying to find how to completely remove the Inspector. After a lot of searching, I still can't find out how this is properly done. Is it as easy as simply deleting the exe file from wherever it was extracted to?

Maybe a dumb question, but I know there are at least 2 of us who can't seem to find the answer. (Though I have no plans to uninstall personally. I think the program is fantastic.)