Guru3D.com Forums

Go Back   Guru3D.com Forums > Hardware > SSD and HDD storage
SSD and HDD storage This section covers storage hardware like SSDs HDDs, RAID chatter and everything related


Reply
 
Thread Tools Display Modes
SSD align need advice
Old
  (#1)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default SSD align need advice - 04-17-2012, 22:57 | posts: 1,354 | Location: Ipswich UK

just checked my 4 ssds 3 i know are ok but my newest not so sure used crucial software and cable to copy old ssd contents to new ssd

this is what i get in diskpart 128GB M4
AS SSD result
read 485mb write 192mb

Diskpart> select disk 0
list partition

Partition type size Offset
----------- -------- ------ --------
partition 1 primary 250MB 1024 KB
partition 2 primary 118GB 252MB


my 3 other drives

Partition type size Offset
----------- -------- ------ --------
partition 1 primary 59gb 1024 KB
partition 1 primary 55gb 1024 KB
partition 1 primary 55gb 1024 KB

Last edited by Barry J; 04-18-2012 at 18:40. Reason: added as ssd
   
Reply With Quote
 
Old
  (#2)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default 04-18-2012, 22:06 | posts: 1,354 | Location: Ipswich UK

no replies might just reinstall instead of using clone
   
Reply With Quote
Old
  (#3)
boogieman
Maha Guru
 
boogieman's Avatar
 
Videocard: EVGA GTX 680
Processor: i72600K @ 4.5
Mainboard: Asus P8P67 Deluxe
Memory: 2 x 4 G Skill
Soundcard: X-Fi Extremegamer
PSU: BFG Tech EX-1200
Default 04-18-2012, 23:08 | posts: 1,560 | Location: Pa

If both text in upper left corner say OK, your GTG. Like this.



If you use the Crucial transfer kit and software you must check the Advanced button. Watch this video.

Last edited by boogieman; 04-18-2012 at 23:11.
   
Reply With Quote
Old
  (#4)
Agent-A01
Ancient Guru
 
Agent-A01's Avatar
 
Videocard: EVGA GTX Titan SC H20
Processor: i7 2700K 5GHz 1.35 HT H20
Mainboard: Asus P8Z77-WS
Memory: G.Skill 8GBx2 2133
Soundcard: Xonar Phoebus-PC360/HD598
PSU: SeaSonic Platinum-1000
Default 04-18-2012, 23:33 | posts: 5,621 | Location: USA

Its aligned. you take 252mb x 1024( to get KB) and the end result is that is divisible by 4, which means its aligned. Although not exactly a good alignment imo.
   
Reply With Quote
 
Old
  (#5)
Mineria
Ancient Guru
 
Mineria's Avatar
 
Videocard: EVGA GTX580 FTW
Processor: Intel i7 2600K H2O
Mainboard: Asus P67 Sabertooth B3
Memory: 32G G.Skill TridentX
Soundcard: Asus Phoebus
PSU: Zalman 850W
Default 04-19-2012, 18:15 | posts: 2,895 | Location: Denmark

1024 KB is fine for NTFS.
   
Reply With Quote
Old
  (#6)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default 04-19-2012, 19:19 | posts: 1,354 | Location: Ipswich UK

thanks everyone thats saved me re installing for now will do it when i next change hardware or want a fresh install
   
Reply With Quote
Old
  (#7)
Mineria
Ancient Guru
 
Mineria's Avatar
 
Videocard: EVGA GTX580 FTW
Processor: Intel i7 2600K H2O
Mainboard: Asus P67 Sabertooth B3
Memory: 32G G.Skill TridentX
Soundcard: Asus Phoebus
PSU: Zalman 850W
Default 04-19-2012, 21:15 | posts: 2,895 | Location: Denmark

Quote:
Originally Posted by Barry J View Post
thanks everyone thats saved me re installing for now will do it when i next change hardware or want a fresh install
This "partition 2 primary 118GB 252MB" is not good thou..
It should say 1024KB and not 252MB, probably why your write speeds are so low.

Why do you have 2 partitions on the SSD anyway?

Last edited by Mineria; 04-19-2012 at 21:18.
   
Reply With Quote
Old
  (#8)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default 04-19-2012, 21:55 | posts: 1,354 | Location: Ipswich UK

Quote:
Originally Posted by Mineria View Post
This "partition 2 primary 118GB 252MB" is not good thou..
It should say 1024KB and not 252MB, probably why your write speeds are so low.

Why do you have 2 partitions on the SSD anyway?
no idea was wondering that myself
   
Reply With Quote
Old
  (#9)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default 04-22-2012, 15:35 | posts: 1,354 | Location: Ipswich UK

formated entire system and performed clean install from usb drive

installed windows and drivers for other hardware will check AS SSD in a couple of days

all disks are aligned

m4 128gb as ssd scored 740

Last edited by Barry J; 04-22-2012 at 22:58.
   
Reply With Quote
Old
  (#10)
tsunami231
Maha Guru
 
tsunami231's Avatar
 
Videocard: EVGA 660gtx sig2
Processor: i7 920 CNPS10X Quiet
Mainboard: Evga x58 SLI LE
Memory: 3x2gb Dominator@1600 6Gb
Soundcard: Realtek HD Audio
PSU: Antec Truepower 750
Default 04-24-2012, 21:17 | posts: 2,283 | Location: USA

so 31k alignment is bad I did that test on my HDD and it says that, And I about to clone my OS to a samsung 830 128gb if i clone is the 31k -bad thing gona transfer over?


Or should i first plug the SSD in nad boot off my hdd and let do its partion thing first? Cause I really prefer not to have to reinstall the os on the SSD
   
Reply With Quote
 
Old
  (#11)
boogieman
Maha Guru
 
boogieman's Avatar
 
Videocard: EVGA GTX 680
Processor: i72600K @ 4.5
Mainboard: Asus P8P67 Deluxe
Memory: 2 x 4 G Skill
Soundcard: X-Fi Extremegamer
PSU: BFG Tech EX-1200
Default 04-24-2012, 22:20 | posts: 1,560 | Location: Pa

What test? AS SSD? If so that's for SSD's not HDD's.

The kit I describe about works like a charm for cloning and alignment at the same time. Someone else may have a cheaper way.
   
Reply With Quote
Old
  (#12)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi
Processor: FX 8350 @ 4500
Mainboard: Gigabyte 990X
Memory: DDR3 / 8GB
Soundcard: onboard
PSU: 880watt Hiper Type M
Default 04-25-2012, 21:51 | posts: 1,354 | Location: Ipswich UK

Quote:
Originally Posted by boogieman View Post
What test? AS SSD? If so that's for SSD's not HDD's.

The kit I describe about works like a charm for cloning and alignment at the same time. Someone else may have a cheaper way.
yep i have crucial transfer kit and i use as ssd to test performance of drive
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2012, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.