Guru3D.com Forums

Go Back   Guru3D.com Forums > Affiliates > RivaTuner Advanced Discussion forum
RivaTuner Advanced Discussion forum This forum is intended for advanced comments, ideas and general discussion of the RivaTuner Utility which is hosted here at the Guru of 3D. This forum is visited by programmer himself - you can only post in this area with a minimum of 10 posts and 7 days forum membership.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
6800GS fan control problem
Old
  (#1)
Mars2000
Newbie
 
Videocard:
Processor:
Mainboard:
Memory:
Soundcard:
PSU:
Lightbulb 6800GS fan control problem - 07-02-2006, 04:06 | posts: 2

Hi,

I bought a 6800GS card. I set up a 50 50 50 fan profile and checked the startup adjust checkbox. But when I run some 3D games, the fan won't stick with 50% duty cycle. It'll become 100% when the core temperature reach 70C. That makes very large noise. I found nothing about low-level temperature control but only driver control. What should I do now to stick the fan with 50% duty cycle? Thanks.


$ffffffffff ----------------------------------------------------------------
$ffffffffff Northbridge information
$ffffffffff ----------------------------------------------------------------
$0400000000 Description : unknown
$0400000001 Vendor ID : 8086 (Intel)
$0400000002 Device ID : 2770
$0400000003 AGP bus : not supported
$ffffffffff ----------------------------------------------------------------
$ffffffffff Display adapter information
$ffffffffff ----------------------------------------------------------------
$0000000000 Description : NVIDIA GeForce 6800 GS
$0000000001 Vendor ID : 10de (NVIDIA)
$0000000002 Device ID : 00c0
$0000000003 Location : bus 1, device 0, function 0
$0000000004 Bus type : PCIE
$000000000f PCIE link width : 16x supported, 16x selected
$0000000009 Base address 0 : e0000000 (memory range)
$000000000a Base address 1 : c0000000 (memory range)
$000000000b Base address 2 : none
$000000000c Base address 3 : e1000000 (memory range)
$000000000d Base address 4 : none
$000000000e Base address 5 : none
$ffffffffff ----------------------------------------------------------------
$ffffffffff NVIDIA specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0100000000 Graphics core : NV42 revision A1 (12pp,5vp)
$0100000001 Hardwired ID : 00c0 (ROM strapped to 00c0)
$0100000002 Memory bus : 256-bit
$0100000003 Memory type : DDR3 (RAM configuration 05)
$0100000004 Memory amount : 524288KB
$0100000005 Core clock : 351.000MHz
$0100000006 Memory clock : 598.500MHz (1197.000MHz effective)
$0100000007 Reference clock : 27.000MHz
$ffffffffff ----------------------------------------------------------------
$ffffffffff NVIDIA VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$1100000000 Title : GeForce 6800 GTS VGA BIOS
$1100000002 Version : 5.41.02.49.04
$1100000100 BIT version : 1.00
$1100000200 Core clock : 300MHz
$1100000201 Memory clock : 700MHz
$1100010000 Performance level 0 : 350MHz/600MHz/1.22V/53%
$1100010001 Performance level 1 : 475MHz/600MHz/1.37V/53%
$1100020000 VID bitmask : 00000011b
$1100020100 Voltage level 0 : 1.22V, VID 00000000b
$1100020101 Voltage level 1 : 1.37V, VID 00000001b
$1100020102 Voltage level 2 : 0.00V, VID 00000000b
$1100030001 Core thermal compensation : 4C
$1100030002 Core thermal threshold : 125C/115C/70C
$1100030003 Ambient thermal threshold : 110C/100C
   
Reply With Quote
 
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2012, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.