softmod 5900xt to quadro3000£¬ seems im the luck one

[rui0317]

How about this :

Barton 3200+
1G DDR400 (512*2)
6800GT 350/1000 OC to 400/1100
Win2k pro
v 61.82 driver

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-03 Weighted Geometric Mean = 25.39

---------- SUM_RESULTS\CATIA\SUMMARY.TXT
catia-01 Weighted Geometric Mean = 16.31

---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
ensight-01 Weighted Geometric Mean = 9.661

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-07 Weighted Geometric Mean = 8.893

---------- SUM_RESULTS\MAYA\SUMMARY.TXT
maya-01 Weighted Geometric Mean = 26.76

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-03 Weighted Geometric Mean = 34.37

---------- SUM_RESULTS\SW\SUMMARY.TXT
sw-01 Weighted Geometric Mean = 15.97

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-04 Weighted Geometric Mean = 26.66

_____________________________________
OOP , put it to a wrong thread , sorry !

Hello everyone, this is my first post. I've just finally finished this thread. It's amazing.!
I'm going to build a PC system for my friend and considering to softmod 5900XT to Quadro 3000.
She uses Maya 6.0 for her uni course.

But I will do it during X 'MAS since my friend will fly back to Hong Kong to buy.

I've seen successful softmod on 5900XT from Inno3D, Leadtek Winfast and PNY (and MSI?) .
May I have suggestions for which I should get , please?

I will have my result posted by then

Thanks very much for help

[Robsth]

club 3d also is a sucksesfull softmod only not with the high ugs

[doudou3d]

Please How to mod the winfast leadtek gf5900xt bios to fx 700 ??

[ayama]

First of all. Patch was succesfull.

I've 30 scores UGS-03 with 66.93 drivers.
But it's low i think, 40-45 will be ok.
Any ideas? Thanks!

[Farmer Brown]

Is there an approach as elegant as the one developed for the newer Quadro FX4000 mod (successful!)?

[AlecRyben]

No, BIOS flashing the GeForce FX 5900 will not make it a Quadro FX 3000.

[Farmer Brown]

Argh. Then the purchase'll be the more expensive card and the more elegant $olution.

[Lord Banshee]

Originally posted by ayama
First of all. Patch was succesfull.

I've 30 scores UGS-03 with 66.93 drivers.
But it's low i think, 40-45 will be ok.
Any ideas? Thanks!

How did you do that with 66.93 drivers?

Please explain?

hey i got a question. i got a pny fx 5900se that came with call of duty. I think its revision 2. But what is the significance of a softmod to QuadroFX 3000? Will i be able to play games faster? Is there a good reason to actually do this mod?

[AlecRyben]

Quadros offer no benefits at all for games. If you don't use Pro 3D animation or CAD software like Max, Maya, Pro Engineer, AutoCad etc., don't even bother with modding.
Quadros are actually slower in games, especially if the game is OpenGL based because Quadro OpenGL drivers are optimized for precision instead of performance.

[a9498383]

hello

i have managed to softmod my new inno3d 5900XT today

results

Run All Summary (Before Mod)

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 11.59

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 40.10

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 47.31

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 12.89

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 10.85

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 7.120



Run All Summary (After Mod)

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 20.15

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 136.3

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 114.8

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 24.10

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 35.35

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 44.35


Thanks for everyone who helped especially AlecRyben, rui0317 and augie

two questions plz

1. how can i enable the AA that can give me smooth lines in maya ?
2. will we ever see any new drivers besides the 45.28 ?

[Unwinder]

> 2. will we ever see any new drivers besides the 45.28 ?

Answered in RivaTuner's FAQ. The answer is NO.

[a9498383]

Originally posted by Unwinder
> 2. will we ever see any new drivers besides the 45.28 ?

Answered in RivaTuner's FAQ. The answer is NO.

bad news

how come rui managed to use new drivers for his modded 6800GT@4000FX ?

[sponka]

FX 5900 and 6800 are completely different generations.

With 5900 you are stuck with 45.28 drivers and in case, that you need professional features, they perform still great.

But if you need gaming performance -- why bother with Quadro? Use newer drivers and you're done.

To combine both of the worlds use dual boot, one for games and one for quadro.

If you're lucky (since you have 5900XT) you might try newer drivers patched only with nvstrap antiprotection. There are some step-by-step guides in this forum which can help you.

[a9498383]

could u show me a guide if you don't mind

max is really slow with opengl/maxtreme, but with direct3d its fast ? anyone knows why ?

[sponka]

http://forums.guru3d.com/showthread....threadid=91686

http://forums.guru3d.com/showthread....0&pagenumber=1

[a9498383]

i need assistance plz..

in maya and 3dsmax when i enable the antialiased lines (2x -> 16x , i tried all) and rotate randomly in the viewport i notice some slight flickering going on , anyone noticed that too ?

[AlecRyben]

VSync should be ON in order to avoid viewport flickering.

[a9498383]

its on, the flickering is really unnoticable, when i disable the AA lines it goes away

talk about killing the conversation.. ^^