need help

[iancook221188]

my smp wu are not getting sent to the sever i am now trying to submit 3 wu total 9000 points my internet is not good at the mo and i don't no wot to do. I also have to restart the smp client just to get work and im loosing alot of between wu . the GPU is doing it every now and then to.

here is my log hope some one can help

[16:19:44] Completed 500000 out of 500000 steps (100%)
[16:19:45] DynamicWrapper: Finished Work Unit: sleep=10000
[16:19:55]
[16:19:55] Finished Work Unit:
[16:19:55] - Reading up to 20317968 from "work/wudata_04.trr": Read 20317968
[16:19:55] trr file hash check passed.
[16:19:55] edr file hash check passed.
[16:19:55] logfile size: 58616
[16:19:55] Leaving Run
[16:19:56] - Writing 20410860 bytes of core data to disk...
[16:19:56] ... Done.
[16:19:59] - Shutting down core
[16:19:59]
[16:19:59] Folding@home Core Shutdown: FINISHED_UNIT
[16:20:03] CoreStatus = 64 (100)
[16:20:03] Unit 4 finished with 95 percent of time to deadline remaining.
[16:20:03] Updated performance fraction: 0.947542
[16:20:03] Sending work to server
[16:20:03] - Already sending work
[16:20:03] Trying to send all finished work units
[16:20:03] - Already sending work
[16:20:03] - Already sending work
[16:20:03] - Already sending work
[16:20:03] + Sent 0 of 3 completed units to the server
[16:20:03] - Preparing to get new work unit...
[16:20:03] Cleaning up work directory
[16:20:03] + Attempting to get work packet
[16:20:03] Passkey found
[16:20:03] - Will indicate memory of 3070 MB
[16:20:03] - Connecting to assignment server
[16:20:03] Connecting to http://assign.stanford.edu:8080/
[16:20:04] Posted data.
[16:20:04] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[16:20:04] + News From Folding@Home: Welcome to Folding@Home
[16:20:04] Loaded queue successfully.
[16:20:04] Connecting to http://171.64.65.54:8080/
[16:20:05] Posted data.
[16:20:05] Initial: 0000; - Receiving payload (expected size: 1773058)
[16:32:03] - Downloaded at ~2 kB/s
[16:32:03] - Averaged speed for that direction ~63 kB/s
[16:32:03] + Received work.
[16:32:03] Trying to send all finished work units
[16:32:03] - Already sending work
[16:32:03] - Already sending work
[16:32:03] - Already sending work
[16:32:03] + Sent 0 of 3 completed units to the server
[16:32:03] + Closed connections
[16:32:03]
[16:32:03] + Processing work unit
[16:32:03] Core required: FahCore_a3.exe
[16:32:03] Core found.
[16:32:03] Working on queue slot 05 [March 25 16:32:03 UTC]
[16:32:03] + Working ...
[16:32:03] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 4 -checkpoint 5 -verbose -lifeline 5884 -version 629'

[16:32:03]
[16:32:03] *------------------------------*
[16:32:03] Folding@Home Gromacs SMP Core
[16:32:03] Version 2.17 (Mar 12, 2010)
[16:32:03]
[16:32:03] Preparing to commence simulation
[16:32:03] - Looking at optimizations...
[16:32:03] - Created dyn
[16:32:03] - Files status OK
[16:32:03] - Expanded 1772546 -> 1975105 (decompressed 111.4 percent)
[16:32:03] Called DecompressByteArray: compressed_data_size=1772546 data_size=1975105, decompressed_data_size=1975105 diff=0
[16:32:03] - Digital signature verified

[08:49:52]

[PantherX]

If your internet connection is unstable, there will be problems with the SMP2 client. I have read that the SMP2 client is vulnerable to network fluctuations and there is a possibility that the connection will drop. When this happens, the WU has to be uploaded from the beginning. Personally, I would temporarily stop folding until the internet connection becomes stable as any delay in uploading the WUs will cause the project to be delayed.

Hope this helps you