AMD Fury X Owners' Thread

This is sick
It has 10Bit colour ! and FS + VSR

It's BIG :banana:

Spoiler

 

I reckon you're going to lift the upper refresh rate from 70Hz to 100Hz; good luck with that.

Other than that I have no idea what you said.
Well done trying to confuse me :thumbup:

 

No, Max for this Tek is ~72-75
I have to try 85Hz with lower res. but maby it just can't
[
Horizontal sync 30 - 89 KHz
Vertical sync 55 - 75 Hz
]

It has Max V=75Hz so it will be its max IMO (same with Low for FS is 30)
And FS must be activated through Monitor OSD -> now set to 30-70 with 1440p

But BF4 70Hz (70FPS is great, on CRT i've played at 74FPS )

All games i play, the experience is just Wow :banana:

Greets Bratan'

 

Well... i think im ****ed xD

I bought a new 4k tv and i think Fury X cant handle both my monitor and tv at the same time...

HDMI outputs are all 1.4 so they manage 4k@30Hz, dp could handle it with an active adapter but i use it for my 2k@144Hz monitor...

am i wrong?


Edit: im dumb, lol... Just ignore it

 

Fury X has a single HDMI port, and three DP ports.

You need to buy DP to HDMI 2.0 adapter from Club3D. It's expensive but it works.

 

XD http://store.steampowered.com/search/?developer=Games Farm

 

Lol.. what the...

This happens because i didnt even look at the back lol

I was completely sure it was the other way around 1 dp 3 hdmi

:stewpid:

 

Lets keep us Fury guys near the top lol

1080p Extreme
Avg: 52.38 fps



4k Optimized
Avg: 71.15 fps



8k Optimized
Avg: 3.59 fps

 

Here ->

High and Ultra:

STD: 1050/570 -42mV from 1.212v +12% Pow

Spoiler

This one is with OC:

Spoiler

 

Here is my Fury Nitro on 1070/545.

Spoiler

Still rocking

 

Id run my Fury in the bench, but no matter what, the effing thing does not launch. Before or after CU update.

Everything else launches no problem. Closed everything but what needs to be running. It flat out does nothing.

My Nitro Fury does 1150/575.

 

Something is seriously wrong with your 1080P Extreme score. I have a Ryzen 7 1700 at 3.8 Ghz and 2 x Sapphire R9 Fury Non X and I only score 3103. My Medium score is around 9100 so there should be no way your score is more than double of mine.

Edit: Yeah, something is seriously wrong here. I have less than half your score, 4297, on the 4K Optimized part.

 

That would mean your second Fury isn't scaling at all.

You have to force crossfire.

 

Yep, and so am I, which is why I know there is something wrong with this benchmark. That is, unless you have to purposely enable it inside the benchmark somewhere. (I also verified that my computer is running correctly by running 3D Mark Vantage and the score is what it should be.)

I am also running on the 17.4.2 drivers in Windows 10 CU.

 

All stock clocks, no increased power limit etc



I don't know if this is a good result or not?

 

You have to create a custom Crossfire profile for the actual benchmark .exe and set crossfire to AFR Friendly or AFR compatible, i don't know exactly at this moment and can't check it. Shouldn't be to much of an effort to make a run with each one of them and pick the better one. Basically even Default CFX may work... but I didn't test that when I did my run. ( http://forums.guru3d.com/showpost.php?p=5419262&postcount=14 )

 

The profile that pops up in Radeon settings is the launcher exe, not the actual benchmark. You have to add that separately.

 

Ultra Preset
ZEN 3.94GHz

Spoiler

FINAL FANTASY XIV: Stormblood Benchmark
Tested on: 4/28/2017 1:42:58 PM
Score: 9084
Average Frame Rate: 61.749
Performance: Extremely High
-Easily capable of running the game on the highest settings.
Loading Times by Scene
Scene #1 2.357 sec
Scene #2 2.709 sec
Scene #3 2.312 sec
Scene #4 2.681 sec
Scene #5 4.953 sec
Scene #6 1.055 sec
Total Loading Time 16.069 sec

DAT:s20170428134258.dat

Screen Size: 2560x1440
Screen Mode: Full Screen
DirectX Version: 11
Graphics Presets: Preset 1
General
-Wet Surface Effects: Enabled
-Occlusion Culling: Enabled
-LOD on Distant Objects: Disabled
-Real-time Reflections: Maximum
-Edge Smoothing (Anti-aliasing): FXAA
-Transparent Lighting Quality: High
-Grass Quality: High
-Background Tessellation: High Quality
-Water Tessellation: High Quality
-Glare: Standard
Shadows
-Self: Display
-Other NPCs: Display
Shadow Quality
-LOD on Shadows: Disabled
-Shadow Resolution: High - 2048p
-Shadow Cascading: Best
-Shadow Softening: Strong
Texture Detail
-Texture Filtering: Anisotropic
-Anisotropic Filtering: x16
Movement Physics
-Self: Full
-Other NPCs: Full
Effects
-Limb Darkening: Enabled
-Radial Blur: Enabled
-Screen Space Ambient Occlusion: HBAO+: Quality
-Glare: Normal
Cinematic Cutscenes
-Depth of Field: Enabled

 

Warhammer 40,000 Dawn of War III PC performance:

Spoiler

CPU

-> https://www.overclock3d.net/reviews...0_000_dawn_of_war_iii_pc_performance_review/9

 

Don't test the " max preset " ? why are you using a custom " preset 1 " ?