using this with my unlocked bios, i used only the first part of this guide, just changed the profile .cfg, i had to open notepad++ with admin permission. i use afterburner 2.2.3 https://sites.google.com/site/qwwwizx/home/gtx-680 ---- Update: Using full hack:
hehe JUst folow the guide, this is how mine looks after the tweak, and i got it set to read only now, you need to change config, then boost volts in AB like it says in guide. volts must be at stock when configuring the .cfg. [Startup] Format=2 PowerLimit=131 CoreClkBoost=0 MemClkBoost=597000 FanMode=1 FanSpeed=25 CoreVoltageBoost=93 [Defaults] Format=2 CoreVoltageBoost=0 PowerLimit=100 CoreClkBoost=0 MemClkBoost=0 FanMode=1 FanSpeed=25 [Settings] VDDC_Generic_Detection = 0 VDDC_CHL8318_Detection = 46h VDDC_CHL8318_Type = 1 CaptureDefaults=0 [I2C_BUS_04_DEV_46] Offset00=67 00 00 5F FF FF FF FF FF FF FF FF FF FF FF FF Offset10=50 E8 FF FF FF FF FF FF FF 00 5F FF FF FF FF FF Offset20=00 00 35 FF FF FF FF FF FF FF FF FF FF FF FF FF Offset30=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset40=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset50=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset60=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset70=FF FF FF FF FF FF FF FF 0A 28 55 FF FF FF 80 D6 Offset80=FF FF FF FF FF FF FF FF 04 08 E8 6D 13 1B 1C 08 Offset90=65 FF FF FF FF FF 2E 18 F8 FF FF FF FF FF FF FF OffsetA0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetB0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetC0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetD0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetE0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetF0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C:\Program Files (x86)\MSI Afterburner\Profiles\ the the one named : VEN_10DE&DEV_1180&SUBSYS_36883842&REV_A1&BUS_1&DEV_0&FN_0 it has your current settings.
it's not letting me save. Keeps saying the file is open in another program Edit: Nevermind. I had opened it twice. :bonk:
No values have to be entered anywheres, just edit the '[settings]' part of your .cfg profile and then close it down then it will ask you if you want to save changes, then confirm, use notepad++ in admin mode, and afterburner 2.2.3 : [Settings] VDDC_Generic_Detection = 0 VDDC_CHL8318_Detection = 46h VDDC_CHL8318_Type = 1 CaptureDefaults=0 [I2C_BUS_04_DEV_46] Offset00=67 00 00 5F FF FF FF FF FF FF FF FF FF FF FF FF Offset10=50 E8 FF FF FF FF FF FF FF 00 5F FF FF FF FF FF Offset20=00 00 35 FF FF FF FF FF FF FF FF FF FF FF FF FF Offset30=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset40=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset50=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset60=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Offset70=FF FF FF FF FF FF FF FF 0A 28 55 FF FF FF 80 D6 Offset80=FF FF FF FF FF FF FF FF 04 08 E8 6D 13 1B 1C 08 Offset90=65 FF FF FF FF FF 2E 18 F8 FF FF FF FF FF FF FF OffsetA0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetB0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetC0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetD0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetE0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF OffsetF0=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
no, unless you perhaps want 1.4v+ haha i gotta reflash my card again to open up the power limit, i'm hitting 132% and the core is throttling, i'm testing 1346mhz currently, but yeah i've seen 1.3v.
I belive software caps out at 1.31v or something like that. You'll need an EVBOT tool to go higher and even then, youll be limited to 1.4 ish volts unless you hard mod. Did you happen to get a Classy with an Evbot plug?
I've not got a plug, but you can buy one and solder it on, there's a few guides, anyways 1.3 volts will perhaps be the sweet spot for me, i'm gonna reflash now ..
I have my power target flashed to 152%. The slider is at 135% now, but even at 1.25v and 1346MHz core, I'm not even breaking 80% power target. What is your temps? And are you overclocking the memory as well? Time to do some Valley runs Edit: I forgot to ask, you are using your LN2 Bios right? IF not, you need to. It has some power limiting features disabled compared to the OC Bios
Using LN2 with the red LED yup, using firestrike extreme to test my OCs are in my sig ( i keep them updated) Got my card unlocked again to 150% power so yeah, wonder how high it can reach now, it passed firestrike at 1346mhz, hit around 56C i guess, i only tested that speed, not gone higher yet
I'm going to run Firestrike in a few. I need to install Steam on this PC. I'm gonna try and see if this works on newer AB
OK. the latest beta of AB works too but for some reason I can't save my profiles. Need to check if this works with EVGA Precision.