Super Pi scores!

Discussion in 'Benchmark Mayhem' started by Filifjonk, Aug 10, 2004.

  1. geforceage

    geforceage Guest

    no kidding...and i cant beleive u can do that with 2g of memory either...most people with really high FSB run 2x512 at most, ideally for benching 1x512 or even 1x256.
    Congrats now when someone needs to know what Pi is to 8million decimal places you can have it for him in 5minutes 52 seconds. LOL.
    Question: what voltage exactly do you use for over 2700ghz? Im going to try really hard to get 200x13.5 stable...but i think i maxed my voltage last time i tried...lol
     
  2. billgates

    billgates Guest

    look at your ram timings in your sig and the ones in my sig notice that is the only setting you need to hit 2.7ghz my previous fsb speeds before changing to tras 15 were identical to yours every place you are maxing out at 204fsb x13 same as me 12x213 fsb same but now i can run at up to 2724mhz slightly unstable, 2712 pretty stable, and 2700mhz rock stable even more stable than you at 2.68 i bet . also when bios says oc failed it is wrong or a little off from restarting all day long reboot on same settings just to make sure oc did fail. then a new os install after all the ocing mess does wonders for stability reformat drives when reinstalling fresh os:)
     
  3. geforceage

    geforceage Guest

    bill 13.5 x 200 for 2700 isnt even stable for me, I can get into window, but most of my superpi test fail. Temps are ok, so.....

    and yeah ill work on the fsb more....damn u and your faster than mine cpu!!
     
  4. Filifjonk

    Filifjonk Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    MSI Radeon RX 600 XT 128 PCI-E
    update: 8M = 7:21 @ 3290MHz (235*14)
    2x256Mb DDR2 @ 626MHz
     

  5. geforceage

    geforceage Guest

    now we are talking...what i dont understand is if your fsb is 235 isnt your memory running at only 470mhz if you arent using a divider or ratio? Can u explain how you run your mem at 313mhz when the fsb is 235mhz? am I missing something about the new ddr2?
     
  6. Filifjonk

    Filifjonk Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    MSI Radeon RX 600 XT 128 PCI-E
    I dunno much about OC and stuff and my english is very bad, fsb is original 200 and mem will run on 533, when I rise the fsb to 235 mem will run on 626 (dual channel 2x313 as u said!) :)
     

Share This Page