GA-Z77-D3H & vcore

Discussion in 'Processors and motherboards Intel' started by doodle333, Feb 14, 2013.

  1. doodle333

    doodle333 Master Guru

    Messages:
    493
    Likes Received:
    0
    GPU:
    HD7870 2Gb
    hi,Ive got the GA-Z77-D3H and would like to know wether this is normal.when i have DVID set to normal and apply 0.015 for overclocking cpu to 4.5 the voltage goes all the way up to 1.392 as Ive seen other people with same settings and there voltage is much lower,so thanks for any reply.forgot to mention have LLC to medium
     
    Last edited: Feb 14, 2013
  2. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,630
    Likes Received:
    1,119
    GPU:
    4090 FE H20
    Do a negative offset like -.050. 1.392v is too high
     
  3. doodle333

    doodle333 Master Guru

    Messages:
    493
    Likes Received:
    0
    GPU:
    HD7870 2Gb
    will do that,but is normal to be that high with such small setting
     
  4. BABA-The Hacker

    BABA-The Hacker Banned

    Messages:
    455
    Likes Received:
    0
    GPU:
    PALIT GTX770 OC 2GB
    and DRAM frequencies & voltages are???
     
    Last edited: Feb 14, 2013

  5. doodle333

    doodle333 Master Guru

    Messages:
    493
    Likes Received:
    0
    GPU:
    HD7870 2Gb
    4x4 dram 1600 and rest voltages left to auto
     
  6. hallryu

    hallryu Don Altobello

    Messages:
    11,381
    Likes Received:
    15
    GPU:
    2x HD7970
    To OP please update your specs. We need to know if you have a CPU that overclocks first.
     
  7. doodle333

    doodle333 Master Guru

    Messages:
    493
    Likes Received:
    0
    GPU:
    HD7870 2Gb
    ok changed spec been meening to it for a while.
     
  8. hallryu

    hallryu Don Altobello

    Messages:
    11,381
    Likes Received:
    15
    GPU:
    2x HD7970
    Nice one the Sandybridge Overclockers will be along shortly :D
     
  9. doodle333

    doodle333 Master Guru

    Messages:
    493
    Likes Received:
    0
    GPU:
    HD7870 2Gb
    ok i set to -0.050 at multi x44 and ran IBT on very high and it past so will try with multi x45 and see how that goes.I have bios MOD F13 from ********* as most other bioses would even fail even lower overclocks.and this one seems better.
     

Share This Page