In this article we check out the Corsair H90 liquid cooler. The Hydro Series H90 is Corsairs first 140mm Liquid Cooling solution that is bound to draw some impressive heat from your processor. With c... Corsair H90 Gets Tested and a Review
Should have been tested against the H80. But going by H60 numbers and this, it looks like the improvement against the H80 is small and not worth a change, if anything it seems like a downgrade.
¿Even with Linkpack (Linx, IntelBurnTest) o Prime95? That's hard to believe. Note you have to look at core temps, not the CPU temp reported by the mobo.
Are you like outside in the Arctic or something? Even with a direct die mount and a H100 the lowest temp I've ever seen is 55.6c and the idle was 35.9 -- that's with a 25c ambient temp. Edit: I'm also pretty confident that I own the worst 3770K ever made. I can't get under 1.32v @ 4.6 and have it stable. And even after I delidded and used noctua my lowest temp is like 78c, prior to delidding it was over 95 sometimes.
It's literally impossible to believe that he would have an i7 3770k at 45C under full load with even custom water cooling and delidding. I don't even believe the 54C figure.
I am only running at 4.2GHZ, with 1.13V. http://i1282.photobucket.com/albums/a523/Devilcry4u/heat_zps2c3af179.jpg
In that picture, it looks to me like you've just started Prime95, on test 2, and your temperatures have already hit 57 as a maximum. Give us an idea of your ambient. I would think you'd need sub-15 to hit this temperature. You definitely do have an H50, right, not something else? You're sure?
Erm...I meant H80...sorry. I'll run Prime95 overnight and see what the temps hit, but it shouldn't be that much higher. CPU is also underclocked (Speedstep) to 1.6GHz when the CPU is idle, seems to work ok.
That's the version 25.11. It's barely stressing your cpu. Get the lastest one (27.9) wich features support for S/I Bridge (64 bit AVX ), then tell us...
Ran the latest version for an hour. Max temps were 56C @ 4.2 (H80) http://i1282.photobucket.com/albums/a523/Devilcry4u/temps_zpsa9e0f766.jpg
But its quieter compared to Kraken at extreme fan profile.. I think i'll be getting this H90 then, i was looking at ThermalTake Water 2.0 Pro, but this H90 looks more appealing. The only bad thing is you can't mount 2 fans, it doesnt include extended fan holder or does it?
by 1C, that's a lot Hilbert could you please review TT Water 2.0 Pro too or is this to old? I see it was released mid 2012.