1st of all thx for this wonderfull program unwinder i am shure you made the world a better place for some of us now there is something i want to now about my card here is some info from rt. $ffffffffff NVIDIA VGA BIOS information $ffffffffff --------------------------------------------------- $1100000000 Title : NVIDIA GeForce 6800 GT VGA BIOS $1100000002 Version : 5.40.02.38 $1100000100 BIT version : 1.00 $1100000200 Core clock : 200MHz $1100000201 Memory clock : 600MHz $1100010000 Perf. level 0 : 350MHz/500MHz/1.30V/100% $1100010001 Perf. level 1 : 350MHz/500MHz/1.40V/100% $1100020000 VID bitmask : 00000011b $1100020100 Voltage level 0 : 1.10V, VID 00000000b $1100020101 Voltage level 1 : 1.30V, VID 00000010b $1100020102 Voltage level 2 : 1.40V, VID 00000001b $1100000003 SW masked units : none can i make up from this that my card should do 400 core and 1200 memory ? i can make the core to 400 with no problems but the memory is holding me back got the card wc so temps on the core r no problems what i wanna know is how can i (if it isn't already) see or make my card run @ 1.4 volt to c if it helps the overclocking i have read alot of treaths about riva tuner but i think my english isn't good enough to fully understand all the subjects being discussed about it so my 2 questions r 1- how to change the voltage (if needed) i think i do 2- can i c at what voltage my card is running in 3d mode hope you guys/girls can help me out tia DSP
i just played a little with nibitor i think my gpu run at 1.4v in 3d but i can change the voltage acording to the voltage table to 1.6v is 1.6 still a safe voltage or wil it fry the card let me know thx
*bump* can someone take a look at the dump of my bios like above and give me some details @IbSta so you think i shouldn't try 1.6 volts there was also 1 more choice but that looked something like ?.?