3D Mark 2011 Guru3d Records

Here are my results!

http://3dmark.com/3dm11/2967688

(heres vantage as well.. http://3dmark.com/3dmv/3961718)

not sure if there any good, or just average.

 

They're normal for your setup, I pretty much get the same

 

I am curious about the Lucid MVP stuff. Will the verification URL show that Lucid MVP is enabled, or is it totally hidden from the results? Since I dont have a board with iGPU, I cant try it out myself.

/qwwwizx

 

Peoples have just to tell what settings they are using. Thoses threads was used before here as they was an automatic update to HWBOT Guru3Dteam.
But it is disabled. So if someone post something with excentric setting, he can just write it ( LOD mod, tesselation off etc ). Anyway, in general, peoples know what score is possible or not: If someone come with a card under stock cooling, and have a similar score of what get peoples under LN2, we will see it..

 

like Lane has said its really up to the poster to say whats up with his runs,since there is no more updating here.

I use a full os at all times only driver level tweeks that you can do in your cp and i also turn off as many processes i can,lod tweeks in certain benches also.I do xp for dx9(for 7980 w7 better)
i have either vista or w7 for others
nothing anyone else could not do very easy thats why i gave up on high scores years ago and just run what i brung and have fun.
I have a sit eating grin on my face when i bench i am all smiles(Alot of benchers are angry looking)i like to do stuff like put a 76gt on dice and mod the deltas and stuff lol not great scores but what fun!

Look at our bench team and the crasy hardware some have here,
its a gaming site not a big bench site,these guys dont want to look at dx9 benches on performance settings lol thats like slumming for elite gamers.

 

Well it didn't before but 3DMark will be implementing it soon just like what they did with AMD's tessellation detection but at the time of me posting this, no they didnt have it so they finally have caught on to it plus an HD6970 getting 9K points? lol...

http://www.bit-tech.net/news/bits/2012/03/14/3dmark-lucid-mvp/1

 

Massman had a news story here + forum chat about lucid. with fm jarnis

http://hwbot.org/newsflash/1658_imp...mvp_and_3dmark_(official_futuremark_statement)

http://hwbot.org/forum/showthread.php?t=40742&page=14

What numbers you can get huh?

 

so today I upgraded my old Gainward GTX 570 to EVGA GTX 680... and this card IS FAST, good thing i resisted my temptation to buy 580 and got the new kepler series
ran some 3dmark11 today and here are the results

Reference EVGA GTX 680



and oc'd to 1181 MHz(1234 Mhz with boost)/1752



Finally passed that 10k mark on 1 GPU rlly nice card, all games play on max setting (except for metro 2033)

P.S. i used EVGA Precision X for overclocking as MSI Afterburner beta 15 didn't seem to work, even though the release notes said it was updated for 680 :/ strange

 

Congrats! But ATTENTION: you don't use MSI Afterburner for OC because OC exceeds speed limited to may overburn to card! But you must always use Precision for OC due to speed limited OC approved by eVGA. If Afterburner hasn't speed limited OC approved then do NOT use it.

 

yea, thnx for the tip, mate i figured that msi won't work properly once i just started it, so didn't even try oc'ing on it and to tell the truth, EVGA precision looks a bit better to me (well it's only my personal oppinion )

 

Damn that new Keplar is sweet just one beat my 2 over clocked 6950's with 6970 BIOS's very impressive congrats.


This is what mine did with both cards at 915/1400 http://3dmark.com/3dm11/3023375

 

GTX 680 just installed results below:

Performance: http://3dmark.com/3dm11/3023193

Extreme: http://3dmark.com/3dm11/3023353

 

Awesome scores, mate. 2600k gives quite a bit more score over my 2500k.
Now just need to wait for ivy bridge...
And, btw, did u try oc'ing it so far? (though it's not rlly needed )

 

Thanks, and no overclocking for me. Spent too much on this card to have it fry right away.

 

Haven't benched in a while but figured I'd run one on each before swapping them. I preferred gaming on the 5970 but have switched to the 580 as i am hoping to add another very soon. Crazy how much faster all your newer cards are though


GTX580@925/2150/1.1v = 7493
http://3dmark.com/3dm11/3063113

5970@950/1175/1.2v = 8956
http://3dmark.com/3dm11/3033217

 

2600K @ 5GHz 7970s @ 1275/1725


By jaxmacfl at 2012-04-01

http://3dmark.com/3dm11/3094224

 

+100mhz GPU offset, +250mhz MEM offset, and 132% power target via Precision X.

 

2600K @ 5GHz 7970s @ 1275/1725


By jaxmacfl at 2012-04-02

http://3dmark.com/3dm11/3100836

 

Have got my EK Nickel EN Waterblocks, new pump.

First run with this waterblock, single HIS 7970@ 1300/1500 - 2600K@5.1ghz - Cat 12.3 WHQL.




Really glad of this setup:

- Delta T of 4-5°C between idle to full load in 3Dmark11 ( sick )
- max reported temp under 3Dmark11, Unigine = 36°C.
- Max reported 1hours of BF3 = 37°C
- VRM1 and VRM2 temps at 30 - 31°C (HwInfo x64 )

System:
- Laing D5 ( 8-24V ) + EK X-Top rev2 ( absolutely genious, high perf + silent )
- 360mm Rad EK XTX + 3 Gentle typhoon ( 1450 AP14 - 100% silent, way better of my Typhoon 1850rpm )
- EK Bay Spin reservoir
- EK Supreme HF Nickel
- 2x EK 7970 Nickel + Acetal EN. ( second card is in RMA )
- 1/2" White tubing, compression fitting, EK coolant
- Gelid Extreme Thermal grease


3Dmark11, max temp 42°C: 1212mv @ 1221mhz/1500mhz : (sick temp, cpu is at 5.1ghz in the loop )

 

thats a sexy looking water block man