hey i saw your updated : you said that you have no problem with driver amd_120102_vga but now you advise me to install 13.6 beta 1 are you saying that first driver was not working right>?
yes but the clocks with this drivers amd_120102_vga pass 150mhz to 1600mhz for example (no "Driver stop working and successfully recovered" , but not working 100% good), with 13.6 beta no have this problems. sorry for my bad english
so!! you are saying that this problem has been solved 100% right???? i 'm so streessed of this **** problem i don't know waht to do anymoreeee
I just don't get it,,,,, this is not just the first time for this problem that has been occured with ati amd card,,,, why amd still selling their cards to the customer without trying to use in their laps first,,, the customer are worried about this,,,, can you imagine that you just bought a new graphic cards and there is the freaking problem showed up for the first day of your using... this is kind of sh it thing that i have ever been through i will never buy an AMD product ,,,,, expecially the new product one i'm kind of scared now ,, you know what i'm saying????
You can't blame AMD for everything, partners are partly to blame.... Personally I haven't had much trouble, but I'd be scared too if I were you. PowerColor is a pretty crap brand tbh, they often have issues. I wouldn't touch one of their cards.
I'm not sure what you're saying, if the card is acting up first day, just send it back. Yes, it's a bit of a hassle when ordering your hardware online, that's why brick and mortar stores can be better idea. Had a similar problem with the HD5790, card would crash every so often in 2D mode (gray screen of death) and eventually corrupt the drivers and/or windows installation. When I send the card back to the retailer I got a replacement, no problem.
same, my first 7950 would gsod in idle quite a bit, took it back to Novatech (30 minute drive from my place) and they just replaced it without making much of a hassle. They tested the card briefly, while I waited, then said they didn't have a problem, I said it happens completely at random, they said fair play, then I said I want a different model and walked home with the Vapor-X. I've been shopping with Novatech ever since, just for this reason. they are a tiny bit more expensive and not always perfect, but nothing beats being able to walk into the shop and get everything sorted if something goes wrong.
you are right i'm sorry ,,,,,,, maybe i was too angry,,,, just because i don't know what to do any more like eclap said,,, i should have bought from the store,,,, not from the internet... this is my best chapter of buying a new computer ever,,, so if you guys have any idea please... let me know and try it,,, outside ppl can not help me ,,, right now i'm just waiting for any guys in the internet know how to fix this,,,,,,,, you guys are the only ppl i got left T_T thanks
I already said if the driver resets only happen while surfing to disable Hardware Acceleration in Chrome. Otherwise you'll need to adjust the GPU voltage with AB or Trixx.
i just install the driver 13.6 beta1 like ni..... said so just wait until the problem occur again,, Thanks for your advice i will try it after this driver is not working
what he's saying is that your 2D voltage might be a tad too low. what is your 2D voltage btw? have you tried disabling hardware acceleration in your browser?
well i don't know where to check 2d Voltage and my google chrome never enable any hardware acceleration as well i'm not sure about how to check 2d voltage is that in AMD ENGINE CONTROL CENTRE which i can go by right click on the desktop?
Jazzie, install MSI Afterburner and see what your 2D voltage is. And try to bump it up a bit. Pill, can you show him how? I'm writing from my phone so it's a bit difficult.
finish!! downloading msi afterburner -_- << this name really scared me 2d voltage >>>>> i have to change on power limit % right? i changed it from 0% to 5 % now is that gooD?
put it to +20%. now check your gpu voltage in the hardware monitor, see here now create a profile by dragging the sliders in the main window with the voltage slightly raised. bump the voltage up a bit. for me, it would look something like this. Notice the voltage is raised to 0.875 now. don't change any other settings! now apply this profile and then click on save and then on one of the numbers 1-5. then click settings, then you'll see a number of tabs on top, navigate into "profiles" tab, click on 2D profile and select the profile you just created. click ok. that should do it.
I don't have an GPU voltage,,,i don't know why ,,,also i can adjust a Core Voltage too.... i'm using just like your version 3.0.0 beta 10