Poll: GeForce 6800 -> Quadro FX 4000 AGP BIOS Mod only success rate

Discussion in 'RivaTuner Advanced Discussion forum' started by AlecRyben, Nov 22, 2004.

?

6800 -> Quadro FX 4000 success rate:

  1. HardMod + BIOS Flash works perfect for me

    1 vote(s)
    6.3%
  2. BIOS flash only works perfect for me

    13 vote(s)
    81.3%
  3. No matter what i do, i get no Quadro capabilities

    2 vote(s)
    12.5%
  1. AlecRyben

    AlecRyben Guest

    Messages:
    7,740
    Likes Received:
    0
    GPU:
    5x580 2x590 2x780Ti 1x970
    GeForce 6800 -> Quadro FX 4000 AGP BIOS Mod only success rate

    There are two recent projects converting GeForce 6800 cards into their Quadro FX 4000 equivalents, one is the hardmod + BIOS flash made by rui0317 and the other one is BIOS flash only made by Mr. Choon-Man, Lee

    Since the BIOS flash is quite harmless to do, and there are a lot of people here that need Quadro capabilities enabled on their 6800 cards, i am setting up this poll so we can see how successful this method is. Of course, the success should be determined by running SpecViewperf suite of benchmarks and comparing the results to the real Quadro FX 4000 in the Spec database.
     
    Last edited: Nov 22, 2004
  2. rui0317

    rui0317 Master Guru

    Messages:
    397
    Likes Received:
    0
    GPU:
    5900XT to QuadroFX3000
    I had voted it
     
  3. Arty

    Arty Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    n/a
    Nice Idea :)

    Hopefully I will be able to contribute on that in few days :D

    rui0317, do you have a link to PNY Quadro FX 4000 bios file at mvk tech?? I'm unable to find it there...
     
    Last edited: Nov 22, 2004
  4. THE JEW (RaVeN)

    THE JEW (RaVeN) Active Member

    Messages:
    81
    Likes Received:
    0
    GPU:
    eVGA 6800GT softmodded to Quadro
    *dot foldered*


    Gonna watch this one with interest.


    Great thread idea, Alec. :thumbsup:
     

  5. Rectifier

    Rectifier Active Member

    Messages:
    63
    Likes Received:
    0
    GPU:
    MSI HD3870-OC
    OK, here's the deal : the Bios mod (I also did half the hardmod) works just fine, BUT the reason I abandoned this bios a long time ago, is that it simply WILL not listen to the pipeline-deactiviation thing (the bios mods or the NVStrap routine).

    Thus, I return my card to the factory [8x1,4vp], and still it uses all vertex processors (even the faulty one) for movie playback or specview (aka opengl).

    Is there any way to bypass this rather annoying effect?
     
  6. Lord Banshee

    Lord Banshee Master Guru

    Messages:
    286
    Likes Received:
    0
    GPU:
    X1950XT 512 @ FireGL 7350
    Rui said that using the included rivatuner bios patch to the dell bios works for fully active pipeline config. But was on a 6800GT not a LE.

    Aren't you playing with fire making the LE work like a Quadro 4000?
     
  7. jbuk

    jbuk New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    xfx gt6800
    first off , ive read these forums for a while now and never posted before, so hi all :)


    secondly , nice work on this mod

    my card is the xfx gt 6800

    ive just finished modding the bios and now my card is showing as the quadro 4000 :D

    just need to enable my extra pipes now

    ive already tested it on 3ds max7 demo and i cannot believe how much better the performance is ,to compare , i had a model of a space ship (sulaco off aliens) , using the standard gt6800 before modding , the amount of edges, polys etc made this file really chug, it was so bad i never actually used it for anything

    now- with the mod, this file flies round , i can even copy the mesh a few times before noticing any performance loss


    it was a well worth risk i took modding this card as i have never modded anything before heh

    anyways, off to do more tests :)
     
  8. StealthBomber

    StealthBomber Member Guru

    Messages:
    109
    Likes Received:
    0
    GPU:
    Fully modded X1950GT
    That Dell FX 4000 Quadro bios was only meant to be an engineer test beta bios, people should try getting hold of a fully verified "release version" bios extracted from a BFG/PNY/Leadtek FX4000 card which is likely to have further tweaks since the Dell engineer beta release bios.
     
  9. Lord Banshee

    Lord Banshee Master Guru

    Messages:
    286
    Likes Received:
    0
    GPU:
    X1950XT 512 @ FireGL 7350
    Sorry but i did not make out from your post, was your xfx sucessfull with only the bios mod or from rui's hard mod... I am looking for the right 6800gt to buy :D
     
  10. jbuk

    jbuk New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    xfx gt6800
    yeah, it was a bios flash only, im not brave enough to do a hard mod heh :)
     

  11. Rectifier

    Rectifier Active Member

    Messages:
    63
    Likes Received:
    0
    GPU:
    MSI HD3870-OC
    That's just it - i've been playing around with the PNY bios, and it just would not work (off course, after every reboot it failed, since it switched to the faulty vertex processor).

    Will give it a try.

    About the playing with fire : It is still the same GPU, there simply isn't a second power connector (so you'll never get 400Mhz/1000Mhz out of it).

    Cooling is easy (with an NV silencer 5 ;))
     
  12. THE JEW (RaVeN)

    THE JEW (RaVeN) Active Member

    Messages:
    81
    Likes Received:
    0
    GPU:
    eVGA 6800GT softmodded to Quadro

    By "PNY bios" I pressume you mean the BIOS of a PNY Quadro 4000, yes? Or are you talking about a 6800NU or 6800LE?
     
  13. Rectifier

    Rectifier Active Member

    Messages:
    63
    Likes Received:
    0
    GPU:
    MSI HD3870-OC
    The PNY QuadroFX 4000 yes. (my 6800(LE) is an XFX)(configured as a NU, go figure..)
     
  14. Rectifier

    Rectifier Active Member

    Messages:
    63
    Likes Received:
    0
    GPU:
    MSI HD3870-OC
    Ok, tried with modded PNY - but again I get a garbled screen at boot time.
    My best guess is that i (wrongfully) disabled the vertex shaders.
    Anyone have more experience with this? Or is it possible this PNY bios only has 3 clock frequencies given (gpu 3d, ddr 3d and gpu 2d, instead of 2d all and 3d all?) (and by modding it i ruined something??)

    Because i'm at a loss here...
     
  15. Lord Banshee

    Lord Banshee Master Guru

    Messages:
    286
    Likes Received:
    0
    GPU:
    X1950XT 512 @ FireGL 7350
    can you post the non-modded pny bios?
     

  16. Lukasz D.

    Lukasz D. New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    BFG 6800OC
    Hello, I've been lurking for a while but I finally decided to try this out, my question is:

    Can someone write a quick step-by-step tutorial on how to do the mod ? ( and what to do if it doest work :D ) or point me in the right direction ?

    Last time i flashed a video bios was on my Matrox G200 card so i'm a little rusty.
     
  17. Rectifier

    Rectifier Active Member

    Messages:
    63
    Likes Received:
    0
    GPU:
    MSI HD3870-OC
    ok, here it is once more:


    h|t|t|p|:|/|/|w|w|w|.|*******|.|n|e|t|/component/option,com_simpleboard/Itemid,/func,view/catid,13/id,927/#927

    Or search the forum for quadro, its the post named quadroFX 4000 (one of two)

    But I've seen reports of people (GT's) being able to succesfully use it... (though without quadro features).

    Pretty strange...
     
  18. Bluefirexp

    Bluefirexp Guest

    Messages:
    597
    Likes Received:
    0
    GPU:
    Waterforce GTX 1080
    hmmm...if bios mod ONLY is working, wouldn't this mean, that NVSTRAP>Quadro would also be enough? So no softquadro needed, only NvStrap.
    Somebody should try with NvStrap WITHOUT bios mod!
     
  19. Lord Banshee

    Lord Banshee Master Guru

    Messages:
    286
    Likes Received:
    0
    GPU:
    X1950XT 512 @ FireGL 7350
    what is the "*******" ? I search for your previous posta nd you have another post like that. Would you mind Clarifing this for me.

    Thanks.
     
  20. efalcon

    efalcon Guest

    Messages:
    5
    Likes Received:
    0
    GPU:
    Galaxy 6800GT
    I use the method of "bios mod only",not modifying the resistors,directly flashing the bios.
    I ecountered the same problem as vpopovic,which is described here:
    http://forums.guru3d.com/showthread.php?s=&threadid=114000&perpage=10&pagenumber=7

    I can't enable the FastWrite function with the original Dell Beta BIOS.
    But Quadro features are OK.

    vpopovic successfully solved this problem by modifying the bios file.
    But this didn't work for me. After flashing vpopovic's quadro bios, FW is enabled, but no Quadro features.
    The system recognized my card as 6800GT.

    My card is Galaxy 6800GT, motherboard is Asus NCCH-DL (875P chipset).
    Can anybody give me some suggestion? Thank you very much!
     

Share This Page