L3p D3sk - Silent Work & Gaming Station

Discussion in 'Die-hard Overclocking & Case Modifications' started by L3p, May 24, 2011.

  1. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Small update.

    Changed 2 fittings, looked nicer .

    [​IMG]


    Sleeved some led cables, and modded the Killer 2100 in the gtx580 backplate.
    (Also a beer with my neigbour :p )

    [​IMG]


    Fans also in its place.

    [​IMG]


    And the Ram leds in action.
    Think it'll look nice in the dark.

    [​IMG]

    Also made a small movie of the leds and the mess :)

    http://www.youtube.com/watch?v=bQMYN9EZgJ0


    Waited for this picture for 8 months to see this result myself :)
    Im Very happy with it !

    [​IMG]


    Bottom almost ready, still need 1 radguard.

    [​IMG]


    Very slowly it gets its old shape :)

    [​IMG]
     
  2. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Been busy with the PSU's, needed the most efficient way for the cables and the airflow

    Also the loop is ready in the backside.


    This was a small solution to get as much as possible space for cables next to the psu.

    [​IMG]


    On both sides of the desk a Bitspower mini X-station for fans and molex connections.

    [​IMG]


    Here i had war with the cables a few times

    [​IMG]

    And the main battlefield.

    [​IMG]


    I knew i could get it smaller !

    [​IMG]

    First leds are working.
    Also some cables ready for under the mainboard tray.

    [​IMG]


    Further on with the pump-tray and got the reservoir hanging again.

    [​IMG]

    Used the same anti vibration rubber under my HDD's and tray as i use for my glass.
    I really love this stuff.

    [​IMG]


    Guess cable management will come later, more and more cables every day :)

    [​IMG]


    Also a small uv led stroke for the right side fans.

    [​IMG]


    Now also leds in the pumptops.
    I like it more then the regular black ones i had.
    This photo is with UV leds in it, but thats WAY too purple.
    But somehow i cant show it in photo's

    [​IMG]


    So i tried blue leds after that, and i liked it :)

    [​IMG]

    [​IMG]
     
  3. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Took me a full hour to find the combination so i can use 2 SLI pipes for the right pump

    [​IMG]


    Molex plugs on the leds of the mainboard

    [​IMG]


    So ill be busy the rest of the day connecting all these cables

    [​IMG]


    Custom length BP pipes

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Bottom also finished.

    [​IMG]


    Time to fill up

    [​IMG]


    Just had to make some pictures.

    [​IMG]

    [​IMG]

    [​IMG]


    Back to getting the system up and running
    So the rubbers for the glass.

    [​IMG]


    First "backplate" in it's place.

    [​IMG]


    Now find a way to work away the cables for 3 screens.

    [​IMG]
     
  4. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Wow second boot it was up and running.
    I really was happy with this.

    [​IMG]


    And im so glad i was able to disable the red leds of the Killer 2100 by the software.

    [​IMG]


    And some pictures of last night.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    This morning went up early again and it was smiling to me

    [​IMG]


    Also very handy those usb connections on Dells

    [​IMG]


    And some more night pictures.

    [​IMG]

    [​IMG]

    [​IMG]
     

  5. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Sanded and polished the logo again.

    [​IMG]


    Quite some work.

    [​IMG]

    [​IMG]

    Don't wanted it to mirror to much.

    [​IMG]

    Freddy from Highflow was my saviour :)
    Sometimes you can't go on cause you miss 1 cable or connector of a few euro's
    Thanks Freddy !!

    [​IMG]


    Also ordered some other stuff also for future projects.

    [​IMG]


    [​IMG]


    [​IMG]

    Different sizes of M4, next week i get M3 too

    [​IMG]


    Tapped it at the last moment for the bitspower thumbscrews.

    [​IMG]


    And ready to shoot some photo's.

    [​IMG]
     
  6. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Here's the link to post #2 with the pictures i took for the Cooler Master Casemod Competition :)



    Had a Q-pad CT for 4 years and was still very happy with it.
    But i just needed a smaller one so ordered a Q-pad UC small.
    But somehow it doesn't registrate my mx510 and mionix anymore that good.
    Contacted Mionix and they wanted to send me a mousepad for on the plexi plate !

    Thanks Peter & Richard !

    [​IMG]


    [​IMG]


    Going to cut it this way i guess.

    [​IMG]


    And almost done !
    Still need to make the edges a little more rounded.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Ordered something at work, they use it for small 9-30V motors on ships etc.
    Im very curious about it how it will work.
    I want to use it for the 2 D5 pumps later.

    [​IMG]


    This way i can use 2 Bulgin momentary switches to set the speed from 10% till 100%
    Also when it's powered off and on, it will remember the last speed setting.

    [​IMG]
     
  7. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    I just can't stop, so some pictures again :)
    This is my latest update 28-5-2011.
    So i hope you liked this buildlog with a lot of pictures :)

    Ordered some extra black bolts for fixing fans to the rad.
    Also for future usage off course.

    [​IMG]

    [​IMG]


    Also got a nice package from Highflow

    [​IMG]


    2 momentary switches will be for "dimming" the 2 pumps.
    The 3rd is to replace the "dot illuminated" switch i use for the reset button.
    I do like the ring illuminated more.

    [​IMG]


    Also wanted to try the Bitfenix sleeved cables.
    I'll use these for the pumps too.
    Very nice and soft sleeve by the way.

    [​IMG]

    [​IMG]


    And this is all i was able to do this week :p

    [​IMG]
     
  8. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Here a movie with the noise the desk creates while gaming :)


    [​IMG]
     
    Last edited: Jun 2, 2011
  9. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
  10. Anubis

    Anubis Ancient Guru

    Messages:
    2,787
    Likes Received:
    0
    GPU:
    Gigabyte GTX 760 4GB
    Gratz!!
    But honestly, you deserve the first place.
    This is the best case mod I've ever seen in my life.

    And all the work you have put into, it's astonishing..
     

  11. Aioras

    Aioras Guest

    Messages:
    643
    Likes Received:
    1
    GPU:
    Zotac GTX980Ti ***937;
    Why are you doing this to us? We don't deserve it, now my rig and any rig that I see just looks meh... Yes I'm jealous of course...
    Now seriously, your comp is the greatest I've seen so far dude!!
    Congratulations!!
     
  12. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Thanks a lot guys !
     
  13. alco

    alco Master Guru

    Messages:
    932
    Likes Received:
    0
    GPU:
    Asus gtx780 DirectcuII OC
    i vote for rig of the month !

    cu @ highflow
     
  14. ShortAlieN

    ShortAlieN Guest

    Messages:
    96
    Likes Received:
    0
    GPU:
    MSI N580GTX
    why cant I see the pictures?!
     
  15. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Sorry man, my host went crazy after some people posten my complete 850 pics buildlog on 4 Spanish sites. It took 150 GB a day datatraffic.

    Here are all the pictures too in 1 slideshow http://tweakers.net/gallery/45974/fotoalbum
     

  16. OvR|<|LL

    OvR|<|LL Maha Guru

    Messages:
    1,170
    Likes Received:
    1
    GPU:
    Nvidia
    Not only is this PC L337. Its a work of art, a masterpiece. You are a natural my friend.
     
  17. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
    Wow thanks for the compliment man :)
     
  18. dcx_badass

    dcx_badass Guest

    Messages:
    9,965
    Likes Received:
    1
    GPU:
    Palit GTX 1060 6GB
    Amazing, really really good.
     
  19. L3p

    L3p Guest

    Messages:
    289
    Likes Received:
    0
    GPU:
    Asus GTX980 SLI
  20. OvR|<|LL

    OvR|<|LL Maha Guru

    Messages:
    1,170
    Likes Received:
    1
    GPU:
    Nvidia
    No thank you for being an inspiration for others as well as myself. This truly is an example of what Creativity, Skill, Patience and Motivation make possible.:pc1:

    I Admire your work, and the music:)
     

Share This Page