CCAP (Custom Catalyst Application Profiles)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Nov 27, 2011.

  1. HonoredShadow

    HonoredShadow Ancient Guru

    Messages:
    4,326
    Likes Received:
    21
    GPU:
    msi 4090
    TDU2 does have CFX enabled now but usage is half bars or a little more than half bars in the CFX indicator using RP.

    Also my fps don't seem massively changed. I even feel that I used to be able to put this game on high and get 60fps (ish) but now I get 60fps on medium.

    Hmmm.... will have to try with CFX disabled with this cap installed and see what happens.
     
  2. Artifice

    Artifice Guest

    Messages:
    17
    Likes Received:
    0
    GPU:
    unlocked 6950 2Gig xfire
    1)Skyrim
    2)TESV.EXE
    3)Skyrim
    4)Oblivion

    Hoping that this will work with the ENB series patch and X-fire (cross fingers)
     
  3. dinodadog

    dinodadog Member

    Messages:
    17
    Likes Received:
    0
    GPU:
    2 x xfx6870
    Modern Warfare 3 would be good. Do u need any info for that.
     
  4. asder00

    asder00 Don Di Driver

    Messages:
    1,191
    Likes Received:
    4
    GPU:
    RX VEGA 64 Liquid
    From what i have been reading around the game currently is having issue with dx11 and a game patch is coming for it, so let's wait for that.
    Also there is already a profile in caps for this game.

    Well i think we can't do much more for this game, read what spyre said.

    I just did what you asked so download this and report back, (but im guessing using it with 11.11b will still use the profile inside the driver and not the one in the caps.)
    And also i remember amd said that crossfire can't be enabled with caps, and needed a new driver so they did the 11.11b just for it, so yeah maybe it won't work.

    Game exes are iw5mp and iw5sp right?
    I used those so if they are correct go ahead and try it: Download
    I added the same settings used for modern warfare 1, but we can also try the one from black ops and another one maybe, so let me know how it goes with this first one.
     

  5. sausje

    sausje Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    2x Sapphire HD6870
    Gave the SP a try, but still getting only around 50% usage on second card.

    [​IMG]
     
  6. Conker

    Conker Guest

    Messages:
    40
    Likes Received:
    0
    GPU:
    Quadfire 2x7990s
    Make modern warfare 3 use call of duty world at war crossfire profile. I was able to set antialiasing and anisotrophic in the driver with that profile and have quadfire work without setting antialiasing to application mode. I noticed i only got 2 videocards to work with the default crossfire profile for mw1 and mw3. Set blackops & mw1 to use world at war crossfire profile also if you can ;). World at war profile was the most perfect quadfire profile as it used the most gpu usage of them all.
     
  7. Alethram

    Alethram Guest

    Messages:
    7
    Likes Received:
    0
    GPU:
    ATI Radeon HD 5970
    Hi there i hope u can make work on this one:

    Assassin's Creed Revelations:

    1) Assassin's Creed Revelations

    2) ACRSP.exe/ACRPR.exe (the 1st for normal game play, the second for Desmond memories)

    3) Im not really sure here, to catch the game window im using WinExplorer and say this:

    [​IMG]

    [​IMG]

    It could be

    - ScimitarEngineWindowClass

    or

    - Assassin's Creed Revelations

    Not sure, and also they are the same windows names for ACRPR.exe and ACRSP.exe

    4) No one of my tries works, ACR looks to have a native CF support but it is poor, it works some times and the FPS go up to 179 FPS on full GPU usage and some times i get just Half GPU usage, and 33 FPS (the FPS drop is always related to low GPU usage).
    I get a little FPS boost enabling AFR with RadeoPro but thats all.
    Maybe u can add the new CAPs from 11.11b on your customs? i don't want to install those crapy drivers.

    Thx for your time and i really hope u can make it work better.

    And sorry for my english it is not my natural language.
     
  8. sausje

    sausje Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    2x Sapphire HD6870
    AC runs "fine" here in crossfire with 11.11b

    Tho it has some microstuttering.. But the engine is so old that a single HD6870 keeps fluid 60fps anyway.
     
    Last edited: Nov 29, 2011
  9. asder00

    asder00 Don Di Driver

    Messages:
    1,191
    Likes Received:
    4
    GPU:
    RX VEGA 64 Liquid
    Tomorrow i will borrow Modern Warfare 3 from a friend so i can test properly and add the right profile.
    Conker i heard what you said, IF i won't use what you suggested i will make a ccap just for you with your preferences.

    Alethram, for Assassin's Creed crossfire support you must install 11.11b there is no other way.
     
  10. Alethram

    Alethram Guest

    Messages:
    7
    Likes Received:
    0
    GPU:
    ATI Radeon HD 5970
    The microstuttering can be fixed setting the refresh rate to 59hz (not 60) in the game options, at least for me, or leaving off the Vsync.

    @asder00 , ok, im going to try those crapy drivers >.>
     

  11. sausje

    sausje Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    2x Sapphire HD6870
    I don't have an option to set it lower then 60Hz ingame, prolly need a custom resolution for it in CCC first i guess?
     
  12. Alethram

    Alethram Guest

    Messages:
    7
    Likes Received:
    0
    GPU:
    ATI Radeon HD 5970
    Nop, i never touch the CCC just install it with the drivers for the card fans Speed, then i disable it and manage all the games and aplications with RadeonPro.

    It is in the resolution option in the graphics menu, i can take a Sshot if u want.
     
  13. sausje

    sausje Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    2x Sapphire HD6870
    No need to, i know it's not there, for me atleast.

    Hell even in CCC i can only set my 1080p res to 60Hz, anything lower and my display reverts back to lower resolution.
     
  14. Alethram

    Alethram Guest

    Messages:
    7
    Likes Received:
    0
    GPU:
    ATI Radeon HD 5970
    Tried 11.11b the performance is a little better, i can`t keep 60 FPS all the time, whatever, the best performance i get is with AFR enabled, but the minimum FPS are sad sometimes for a old engine like this one.

    Now another questions:

    It is possible to give a try on this games?:

    - Might and Magic Heroes VI

    - The Witcher enhanced edition

    - Drakensang the River of Time*

    *for this one i know there are a profile but never works for me, 50% of GPU usage all the time.

    asder00 tell me if it worth the shoot and i put the parameters u are asking for.
     
  15. Gregorez

    Gregorez Guest

    Messages:
    145
    Likes Received:
    2
    GPU:
    CFX MSI R9 290 Gaming 4G
    Did you tried to rename game exe to AssassinsCreedIIGame.exe ?

    For River of Time you may try this ->
    http://forums.guru3d.com/showthread.php?t=344967
     
    Last edited: Nov 29, 2011

  16. Gregorez

    Gregorez Guest

    Messages:
    145
    Likes Received:
    2
    GPU:
    CFX MSI R9 290 Gaming 4G
    Can you post some "how to" so we can make own CAPS ?
     
  17. V1tol

    V1tol Guest

    Messages:
    284
    Likes Received:
    0
    GPU:
    MSI 1070 Gaming X
    Shortly:
    1. Convert .blb to .xml
    2. Add your profiles
    3. Convert .xml to .blb
    4. Copy .blb to system32 folder
    5. Reboot
    6. Profit
     
  18. Gregorez

    Gregorez Guest

    Messages:
    145
    Likes Received:
    2
    GPU:
    CFX MSI R9 290 Gaming 4G
    Thx, great, can you tell me plesae which tool should i use, is atiapfxx.exe good for job ?
     
  19. V1tol

    V1tol Guest

    Messages:
    284
    Likes Received:
    0
    GPU:
    MSI 1070 Gaming X
    Yes, use it from command line, you'll get help how to use it. It can convert blb to xml and vice versa.
     
  20. asder00

    asder00 Don Di Driver

    Messages:
    1,191
    Likes Received:
    4
    GPU:
    RX VEGA 64 Liquid
    Added CCAps v0.8: Modern Warfare 3 Crossfire :)
    see changelog for details
     

Share This Page