Fx 5700le Volt Modded Bios Is Here

Discussion in 'Videocards - NVIDIA GeForce' started by [flAsh2K5], Feb 11, 2005.

  1. [flAsh2K5]

    [flAsh2K5] Guest

    Hey I hav Got two bolt modded BIOS of Geforce FX 5700 LE (256 mb). 1st BIOS has standard clocks while second one is overclocked. plz do use the OMNI EXTREME EDIT FX or NiBiTOR to check if my volt mod is there or not. ;) :D

    1. http://www.freespaces.com/techlabs/BIOS/5700le1.zip

    2. http://www.freespaces.com/techlabs/BIOS/57001.zip

    Sorry to say :D but I must say that :D the second BIOS is an underclocked version of FX5700, but believe me I flashed it on my FX 5700LE 256 mb card and it did worked nicely.

    *******FOR FLASHING PLZ USE nvflash 4.41 WITH COMMAND
    " nvflash -u -p -f biosname.rom ";)
     
  2. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    wow, something new for - le :D

    what's the difference in games?
    what's your core and memory clocks?
     
  3. [flAsh2K5]

    [flAsh2K5] Guest

    I can't say about games but hey the overclcoking limit certainly went up (I don't play games on this PC except Serious Sam SE) to 590mhz from 480 mhz earlier. As for core it can easily go upto 525mhz without any artifacts even without volt mod.
     
  4. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    ok, i'll try it later,got to go now...
     

  5. [flAsh2K5]

    [flAsh2K5] Guest

    I seems 590mhz memory was too much (as I just had a cold reboot). anyway it seems stable at 580mhz memory as it isn't hanging but "ll check it in 3D as well

    and hey Shaman BYE :D
     
  6. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    [flAsh2K5]

    what brand is your 5700le (256mb)???
    I think that it might not work besause I have ''Sparkle'' card and without volt modd I can overclock it only 420\430 then comp freezes in games, and showing artifacts. I'm try to make better cooling from my old heatsink and fan :D
     
  7. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    people what do u think? about this project? :)
     
  8. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    I'm dissapointed with guru3d, no one wanna help me!!! :(
    it's good for you that you have money and you can buy this god dawn 6X00gt, I don't have.... whatever....
     
  9. Da_Devil

    Da_Devil Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    LeadTek WinFast A400 TD unlocked 16x1,6vp, 400/875
    is there such mod for LeadTek 5700 Ultra GDDR3 ? coz i realy dont wanna volt mod it(im not very good)
     
  10. micketh

    micketh Ancient Guru

    Messages:
    3,727
    Likes Received:
    1
    GPU:
    Asus RTX 3070 8GB
    you could use omiextreme or nibitior to change the voltage from 1.4 to 1.5, what clocks can u get since your card is gddr3?
     

  11. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    i have cheaked those .rom's with nibitor, looks ok, will i be able to flash XFX bios on sparkle card?
     
  12. Da_Devil

    Da_Devil Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    LeadTek WinFast A400 TD unlocked 16x1,6vp, 400/875
    well i get 475/975 default i can oc it with no problem to 500/1100(but after a good workout at HL2 it gets artifacts) so where can i find this omiextreme or nibitior ? and is it hard ? thx in advice
     
  13. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
  14. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
  15. Shaman391

    Shaman391 Maha Guru

    Messages:
    1,008
    Likes Received:
    1
    GPU:
    Gigabyte 66GT 128mb@600/1320 1.6ns
    F@#K, try google for Nibitor
     

  16. Da_Devil

    Da_Devil Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    LeadTek WinFast A400 TD unlocked 16x1,6vp, 400/875
    l0l is the newest version 1.9b
     
  17. Electabots

    Electabots Member Guru

    Messages:
    141
    Likes Received:
    0
    GPU:
    780ti/570hd
    nibitor 1.9b

    Hmm...guess urls won't work...but 1.9b is the latest version. better then omni...whatever imho
     
  18. Da_Devil

    Da_Devil Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    LeadTek WinFast A400 TD unlocked 16x1,6vp, 400/875
    so ive found the thing and saved meh bios and ran in nibitor and i changed only the volt thing to 1.5 coz it was 1.4 and only the 3D right ? next all is left to pray something doesnt happend to my other 5700 ultra
     
  19. Electabots

    Electabots Member Guru

    Messages:
    141
    Likes Received:
    0
    GPU:
    780ti/570hd
    Right... your doing this to a 5700 ultra right? Because when I set my 6800 to 1.5v I got some rather creepy image distortion right when windows booted...

    Oh and make sure to keep a backup of your original bios just incase...
     
  20. Da_Devil

    Da_Devil Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    LeadTek WinFast A400 TD unlocked 16x1,6vp, 400/875
    yeah to a 5700 Ultra(LeadTek) default volt is 1.4 on 3D on 2D 1.3 i changed 3D to 1.5 and 2D stays intact right ?
    and also will it be bad for the temp. ?
     

Share This Page